Last seen: Jun 17, 2025
So, I am now three quarters through the radiators using temp probes , I have stopped this morning as the system is not circulating due to warmer temps...
@bontwoody Thanks , In thought it was a dumb question but hey ho you learn something new every day. Slowly getting round to turning lockshields down.
Still at it here , correct me if I am wrong , I am still adjusting lockshields and happen to put a simple temp probe on ingoing /outgoing pipes at the...
@jamespa If only! Hindsight is great , but I was presented with the design 8 yrs ago , so I can only hope that they do the job , most of the time when...
@jamespa All Rads sized.
Just adjust the ft.? Also do I keep one fully open as it was in Hallway please.
What do you mean by an Emitter at the end of a run, please. When you say an Emitterr is that another word for a Radiator. By way what do you suggest...
@toodles Do you think that the Rads I have in the large rooms , Kitchen and bathrooms should also be throttled down as in Balance and all be the same ...
HaHa , Im retired too and also have a need to be too fussy. I have read the Heat Geek so understand a little more , whatever my valves are , they are ...
Ok , thanks , but I thought that was the purpose of adjusting them , to get them where they need to be , especially same room size an temperature. Ye...
This is crazy , I m still only at two rads trying to get 20-20.5 c , I thought I had it right last night -5c , but its warmer outside today 3c and the...
Latest Posts
-
RE: RDSAP10 effect on existing heat pump EPC rating?
There is a real disconnect between how performance is ...
By Aaron , 10 hours ago
-
RE: Spain's blackout - El Apagón - the report is out
The first press reporting is out Here's a brief synopsi...
By Lucia , 10 hours ago
-
We’re proud to share that the Homeowners’ Q&A, the ...
By Mars , 11 hours ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@majordennisbloodnok thanks. The reason Planet appealed...
By benson , 12 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
Some thoughts from me, having been through the ECO4 pro...
By Old_Scientist , 17 hours ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 18 hours ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 2 days ago
-
RE: Vaillant AroTherm Plus 7kW
Thanks for the comprehensive write-up, I am considering...
By Scalextrix , 2 days ago
-
@ashp-bobba ‘Wattson, how many grammes of Co2 are you r...
By Toodles , 2 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 2 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 2 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 2 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having made some enquiries locally I have found a compa...
By Morgan , 2 days ago
-
RE: I don't need any heating in the summer. How do I turn my Samsung heat pump off?
Thats great Someone else is struggling with this in a...
By JamesPa , 2 days ago
-
@bart Best of luck moving forward, I look forward to he...
By ASHP-BOBBA , 3 days ago
-
RE: Ecodan EMP2 kit - is it any good?
Please note: heat meter accuracy at 95+% is as long as ...
By ASHP-BOBBA , 3 days ago
