Samsung Gen 5 ASHP settings?
Most of the year my system runs pretty well, the house is warm, the HP has to work very little really, however the recent cold snap has highlighted the fact that at cold temps its very ineffcient (see usage here for Nov) we used 31 KWH yesterday!
Stats are all set at circa 21 degrees down stairs (UFH) and 19.5-20 upstairs (rads), i assume looking at this the flow temp is too high in the weather comp curve?
These older systems are a bit of a pain to configure as the menu system isnt meant for the average joe but if anyone has the same set up could you tell me what your settings are for flow temps in the weather comp, thanks in advance
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 384 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
Daikin DHW Margin - what is it?
Our Daikin Altherma 3 Monoblock has DHW settings for bo...
By Pipcart , 12 minutes ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
@deltona I did draft a long point by point response ...
By JamesPa , 16 minutes ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor It is indeed for servicing. My current service ...
By Morgan , 43 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
@transparent Thanks, I think I now get it. I am sor...
By JamesPa , 46 minutes ago
-
RE: Sunsynk Whole House Backup Issue
Hi @lostandconfused , I agree that topic/thread is the ...
By Batpred , 56 minutes ago
-
RE: Speedcomfort radiator fans
In case it helps Andrew Kuhne on openenergy monitor has...
By JamesPa , 2 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@jamespa, we have got this topic, which all the mods ca...
By Mars , 4 hours ago
-
Things have gone quiet with you @drei. Any updates?
By Mars , 4 hours ago
-
RE: Passiv Smart Thermostat - Help & Forum Support
Thanks @tim441. Interesting timing, as Passiv are a cur...
By Mars , 6 hours ago
-
Hi everyone, I have a two year old Marlec Solar iBoos...
By Tallmarc , 9 hours ago
-
RE: Please help with the settings ecodan
Are you trying to address any particular performance is...
By Sheriff Fatman , 15 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
🤣 Well, I never managed to get the HA solis "...
By Batpred , 16 hours ago
-
RE: Experience - New Build / Complete New Heating System
Your sap clculations should give you a heat loss figure...
By JohnnyB , 16 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@editor hmmm, our engineers Rae, Craig, Naz, Rob and Ry...
By ASHP-BOBBA , 17 hours ago
-
RE: I’m glad the cold spell is over!
@editor as a reply for this date the 6th of Jan in o...
By Nursethescreens , 18 hours ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 19 hours ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 19 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 22 hours ago



