Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 27 / 141
Posts with their shortened content
RE: Heat pump not reaching flow temperature  

By DaveC, 3 days ago

  @majordennisbloodnok our swap out install finished around 1pm
RE: Heat pump not reaching flow temperature  

By johnd, 3 days ago

  @majordennisbloodnok I cant remember the exact time they arrive but they where done by late morning\lunch time.
Majordennisbloodnok RE: Heat pump not reaching flow temperature  

By Majordennisbloodnok, 3 days ago

  Are you both going to post times as well as dates to see if the removal of one could've dovetailed in with the installation of the other? As coincidences go, that's a corker.  
RE: Heat pump not reaching flow temperature  

By johnd, 3 days ago

  @davec wow.
Majordennisbloodnok RE: Power outages and storms: A surprisingly good DNO experience  

By Majordennisbloodnok, 3 days ago

  Agreed, which is no more nor less than a customer should be able to expect. It's a pity that seems to be an exception, not a standard.  
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP  

By JamesPa, 3 days ago

  To answer this properly you need a heat loss calculation. Then you can work out how much flow each radiator needs which will tell you what diameter pipe (internal diameter) is required. Until you ha...
RE: Heat pump not reaching flow temperature  

By DaveC, 3 days ago

  @jamespa yes it is a heat exchanger between the glycol loop for the external unit and the DHW and space heating loop. Apologies we actually have 3 water pumps; 1 for the glycol loop, 1 for the space h...
RE: Power outages and storms: A surprisingly good DNO experience  

By Batpred, 3 days ago

  Exactly what came to my mind. Octopus is one of the few where the employees will explain where they have a limitation or challenge to address whatever issue it may be. Refreshing specially in the odd ...
RE: Heat pump not reaching flow temperature  

By DaveC, 3 days ago

    I don’t know how you feel about coincidences, but we had our 7kw swapped out on also the 28th of November with the 11.  
RE: Heat pump not reaching flow temperature  

By JamesPa, 3 days ago

  Definitely please!   Is that a plate heat exchanger above the bucket. Can you tell whether it is connected to the DHW or to the space heating between heat pump and emitters? Did you say you hav...
Toodles RE: Running from backup generaor in powercut?  

By Toodles, 3 days ago

  @batpred In our case, 3 times each day when the Octopus Cosy hours stop! Regards, Toodles.
RE: Heat pump not reaching flow temperature  

By johnd, 3 days ago

  @davec installer swapped it out on the 28th November.
Page 27 / 141

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO