Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 15 / 49
Posts with their shortened content
Mars RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By Mars, 2 weeks ago

  @skyefarmer great you located the source of the issue and that you have the skills to replace the capacitor. Fingers crossed!
RE: Location of hot water isolation valve on cylinder  

By ASHP-BOBBA, 2 weeks ago

  @rossowheels if you isolate the water supply in it will stop the flow to the hot water on all circuits, any circuits lower than the tank will need draining, to do this you must open all hot water taps...
Location of hot water isolation valve on cylinder  

By rossowheels, 2 weeks ago

  Attachment : IMG_2123_Original.jpeg Attachment : IMG_2122_Original.jpeg I have recently moved to a property with a heat pump and would like to isolate the hot water supply to the bathroom i...
RE: Ecodan consuming 100kwh per day in new build!!!  

By JamesPa, 2 weeks ago

  From what you say about the radiators upstairs it does sound like you have problems with the pipework etc (which may be as simple as balancing or even just air in the system since it did work for a wh...
RE: Ecodan consuming 100kwh per day in new build!!!  

By anca1808, 2 weeks ago

  Hi James , Yes. There were multiple issue. Insulation was solved 80 %. Radiators were changed to bigger size. But even with that the upstairs never got hotter than 19 20 degrees , nor did the radiator...
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By JamesPa, 2 weeks ago

  @skyefarmer pleased you found it!
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By skyefarmer, 2 weeks ago

  Attachment : Nibe Fighter 2005 Capacitor.jpg Update: It finally stopped raining and I opened up the heat pump. The attached picture tells the story. Quite surprised that can happen! So I'm current...
Mars RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By Mars, 2 weeks ago

  That's a very good suggestion. I'd forgotten that we had a similar issue a couple of years ago, but ours was accompanied with an error on the screen that I translated into a flow error. Given the age ...
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By JamesPa, 2 weeks ago

  It might not be in the manual, mine was a rather innocuous third party 40mmx80mm brass fitting between the heat pump isolation valve and the heat pump itself, on the return. It may of course be someth...
Mars The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve  

By Mars, 2 weeks ago

  It’s fascinating to watch how low-temperature heating is evolving in the UK. For decades, domestic heating has largely been defined by the simplicity and forgiving nature of fossil fuel boilers. Stick...
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW  

By skyefarmer, 2 weeks ago

  @jamespa Thank you! As soon as it stops raining I will check that out. Looking at manual now.
Page 15 / 49

 

 

 

Share:

Join Us!

Latest Posts

Members Online