Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 27, 2026
You are most welcome, I think you will be making a very good decision to invite OE to carry out a survey - if it is as thorough as the one they carrie...
@ronin92 As you say ronin, vested interests seem to be prevalent; I’d go as far as to say that they are the Tail Wagging the Dog! I’m 75 and unless I ...
@allyfish Pleased to hear that it is all ‘hanging together’ as you detailed allyfish. As I have a Sunamp Thermino, I am able to charge anytime of the ...
@squeakysim Due to the inability to come to a final plan for installation, OE did not provide a quote; I did write and thank them for all their effor...
@derek-m I haven’t looked into this very deeply yet but have an Eddi which has 2 CT clamps connected to my PV and Powerwall set up. I read that I may ...
@squeakysim We had Octopus Energy visit and advise us last March / April; a plumber and an electrician both spent three hours carrying out a very thor...
Perhaps I should add to the above system (sorry, but I failed to be able to edit the entry) based on a Daikin 8 kW ASHP that the domestic hot water he...
@rod If Homeowners are prepared to provide the information, then maybe a spreadsheet containing the following information would be of most use f...
We are on Octopus Agile and Agile Outgoing; likewise, I look at the daily Agile rates and set up my Powerwall charging times and if the sun is likely ...
@derek-m That’s fine Derek, I don’t regard them as ‘troubles’ as such, just a slight failure on my part not to have chosen an installer who might have...
@derek-m Indeed, I agree with you entirely! This is the initial set up and although the installers have made a good neat job of the physical installat...
Regarding the head; the only pipework in the system that is above the pump is approx. 0.5 metres of pipe from the pump’s output to the heat exchanger ...
- 27 Forums
- 2,751 Topics
- 64.7 K Posts
- 1,808 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
It depends An unloaded current transformer can output...
By bobflux , 5 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 16 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 3 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 3 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 3 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 3 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 5 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 5 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 6 days ago
Members Online
No online members at the moment



