Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 27, 2026
Many years ago (late 70’s or early 80’s) I had a Westland Garador fitted to the front of an extension built at the side of the house. This up and over...
@derek-m On the lines of ‘Have you stopped beating your wife, yes or no?’ I have not lowered my emissions from any vehicle on my drive at all; I don'...
@derek-m Well, at least you would be safe from prying government eyes for, as we know they don’t impose windfall taxes! 😉 Regards, Toodles.
@rusty Thinking some more about the whole business of EPC’s and the reasons for their existence, as the finished document is ‘published’ in electronic...
@tufty Sounds to me as though they would like to extract more money from you by degrees. 😉 (Sorry) Toodles.
@iancalderbank Thank you, I am looking forward to the installation too! At present, I have a Heatmiser NeoAir thermostat setup and to me, this is very...
@jeff I really don’t want to politco-bash in this forum, however, I hear the good news that Nissan intend to carry on with the original 2030 proposal ...
@tuftyThere is one thing you can count on - that is you can’t count on the weather! Sod’s Law dictates that if you take the risk, the weather will cat...
The rates have appeared for tomorrow and there are some hours of plunge pricing until 06:00; the plunges aren’t that deep but they are negative never ...
Not sure whether something has changed on my setup but, I have noticed that OE’s Agile rates are not available until several hours later than usual th...
You could do worse than to look on YouTube for various topics by Heat Geeks, sometimes their material is a little pushy towards the idea of employing ...
@bontwoody I should think that there is a distinct chance that more than 5 kW/h might be used between the end of one Cosy dip ending and the next one ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 33 minutes ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 20 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 2 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 2 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 2 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 3 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 3 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 4 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 5 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 5 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 6 days ago
SPONSORS
