Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 4, 2026
@papahuhu ‘Salright really, I have rested all my tenterhooks in a thick wooly fleece for now. Toodles.
@papahuhu Tenterhooks all round! 😉 Toodles.
@papahuhu I found that IOF would attempt to recharge as soon as it reached the preset 20% reserve and I had to intervene by opening the Tesla app and ...
@papahuhu My reply was based on your comment of 6 kW of PV, perhaps you meant availability of a total of PV and battery capacity. In that instance I c...
@papahuhu I have an 8.1 kWp. array, not optimally orientated I admit but, my mean yield between 16:00 - 19:00 is never better than 4 kW at the start a...
@papahuhu Ooohh!! I think I had better study the 8 legged site then! Toodles.
@batpred Greg Jackson explained that most energy is ‘bought’ months in advance so the late summer and early autumn are unlikely to benefit from any cu...
@etchedpixels My comment was in reply to @jamespa commenting on devices that overheat the fabric. As to PCM, I have a Sunamp Thermino ePV 210 for my D...
@jamespa The technique of ‘overheating’ the fabric of the building during cheapest tariff times may or may not suit everyone; the Homely smart control...
@majordennisbloodnok And should make for very interesting reading indeed! Regards, Toodles.
@ian33a 😉 Toodles.
@ian33a FWIIW, we have a Daikin 8 kW Altherma 3 HP. (running 24/7 and providing 22.5 deg. C throughout property.) We are using Octopus Cosy and with t...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@batpred This is a great idea in theory. Our house is i...
By ian33a , 36 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 13 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 18 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 2 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 7 days ago
SPONSORS
