Last seen: Mar 14, 2024
Weather compensation made a big difference to my setup although more recently with the lower temperatures I've seen it cycling again which you want to...
I've been checking my usage again given the recent colder weather and I thought the previous change to using WC resolved the cycling I was seeing prev...
@bretix have you managed to get good efficiency with2 ASHP? Out of interest do you have a picture of the flow regulator and are you finding your set...
@cathoderay That's a difficult one to answer as I can't see any obvious signs of leeks but I do have to top up CH circuit more regularly than I think ...
When say flow I mean litres per minute flowing through the system to the heat pump as different size heat pumps have different requirements. I don't m...
The one issue I've had with my install is checking that the we have the correct level of flow around the heating system before the install is performe...
@allyfish Yep it certainly seems better and will check next time we get below 0c temperatures. I don't have UFH yet but was thinking of installing do...
I thought it would be good to give an update with the weather compensation turned on since 21st Dec. I can see the consumption has dropped significan...
@allyfish thanks for the instructions I found them in one of your other posts when I changed the settings earlier today. I think when it's on fixed...
I'm so annoyed at the installer and Grant engineers for having the weather compensation turned off. Having read a bit more of the installation manual...
@derek-m OMG I can't believe the Grant Engineers must have not set the weather compensation off! I've just changed that to be on now that I've found ...
- 26 Forums
- 2,289 Topics
- 51.4 K Posts
- 289 Online
- 5,949 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
Im guessing a fair proportion of that group are renters...
By JamesPa , 3 minutes ago
-
RE: DHW heat loss through pumps.
Which is exactly how houses used to be designed (and I ...
By JamesPa , 4 minutes ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
I think I have plenty of system volume in the radiators...
By AndrewJ , 11 minutes ago
-
RE: Renewables & Heat Pumps in the News
The last census said 2.8 million one bed households so ...
By Jeff , 18 minutes ago
-
RE: Do Heat Pumps need to start up at Full Power?
@steelbadger We have an LLH with secondary pump; the se...
By Toodles , 3 hours ago
-
RE: Electricity price predictions
We live in a democracy on a crowded island so everyone ...
By JamesPa , 3 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
And the saga continues… So today a Senior Grant Engin...
By Crimson , 18 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@jamespa Yes, the OAT sensor is situated on the back pa...
By Toodles , 20 hours ago
-
RE: Ecodan ASHP Low COP and Unstable Compressor Frequency
Just to clarify, returning water from UFH is colder tha...
By lukewarmbath , 20 hours ago
-
RE: 10kw heat pump run in 24*7 data?
A different heat pump (Midea 14kW) but a stark reminder...
By cathodeRay , 20 hours ago
-
From what I see, the work to upgrade the cable, etc all...
By Batpred , 21 hours ago
-
RE: Confusion over Octopus Tariffs
That's sounds great. I have no ASHP, but 15kwh storage....
By Batpred , 22 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Locked environments are difficult to manage, it also me...
By Batpred , 22 hours ago
-
RE: Has anyone seen this problem before? Huge anticycling times
Hi all, I had a 15kw installed 3 weeks ago. The past we...
By jamesh , 1 day ago
-
Adia Therma - 'autopilot for heat pumps'
Thought I'd pop this one in here as the Adia proposal a...
By seatonian , 2 days ago
-
RE: Mitsubishi Ecodan R290 10kW performance
Don't know answer to final question. Your contract p...
By JamesPa , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
Ah, it seems PACE BMS are easy to source on AliExpress,...
By Batpred , 2 days ago
-
RE: Vaillant water pressure gauge vs Analogue gauge
@jamespa Agreed I don't feel concerned about this, espe...
By jeegnesh , 2 days ago
-
RE: Gov wants to alter our FIT contracts from rpi to cpi
The consultation is just part of the normal process for...
By Jeff , 2 days ago


