Last seen: Feb 4, 2025
Hi Derek, What I changed this morning has made the ufh come up to temperature very quickly, so I'm guessing that's not going to be efficient as the ...
@derek-m Hi Derek I just set it up as per Ally's post. Bar that the 2102 is at 35c. This was what my EHG told me to only adjust. I changed the set...
@allyfish Thank you. Just as a note as I read back through previous posts, We have UFH throughout including upstairs with no rads!! What I changed...
@allyfish So now I have the setting's I have quoted the only thing I need to adjust in the future is 2102? And this in turn will run my ashp at best...
Good Morning AF & D, 2100 is set to 1. 2101 = Now just set to 45c as you stated. 2102 = 35c This was the one the HG told me to only adjust FY...
Hi Derek, I have set it up as above bar 2102 is at 35c. 2101 can’t see what this should be at from Ally’s posts. Anyway ours is set too 35c? 2100...
@derek-m Hi Derek, temperature sensor on Grant tank is at the bottom fyi. Regarding the flowrate temperature being set at 35c it seemed to be OK a ...
@allyfish hey AF, So finally home and checked some settings as what you asked me to check. Low and behold the water was actually set to 52c for some...
Apparently we are running on weather comp from what the EHG set up as it wasn't when commissioned. Upstairs it doesn't come on as the thermostats are ...
AllyFish maybe you can help. So away and told the wife to up the flow temp to 35c last week as it started to cool off/frost outside. Was apparently ...
@allyfish Thank you for all the information. When home May lift the hot water temperature up to see the difference. Regarding Homely guess best to ...
@allyfish Yes ours is on 24/7 now and see how we get on over the winter as per EHG information. By just adjusting the weather comp, like you state ...
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 278 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Experience - New Build / Complete New Heating System
Your sap clculations should give you a heat loss figure...
By JohnnyB , 19 minutes ago
-
RE: Vaillant aroTherm not heating with many faults
@editor hmmm, our engineers Rae, Craig, Naz, Rob and Ry...
By ASHP-BOBBA , 1 hour ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@editor Hi Mars. I totally agree with your comments. ...
By Richard24738 , 1 hour ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
Indeed! And my apologies, I should have expected you...
By Batpred , 1 hour ago
-
RE: I’m glad the cold spell is over!
@editor as a reply for this date the 6th of Jan in o...
By Nursethescreens , 2 hours ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 3 hours ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 3 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
@batpred I started reading this thread thinking I would...
By Hook , 5 hours ago
-
RE: Please help with the settings ecodan
@sheriff-fatman when I increase it to number 3, the ...
By nose1972 , 5 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 6 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 7 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 7 hours ago
-
RE: Rate the quality of your heat pump design and installation
Well, the guy came out, turned the heat pump to max, we...
By razz , 7 hours ago
-
Midea R32 setup and bizarre running with lengthy off periods?
Hi I am new to the world of ASHP and have just had a re...
By Countryman Helmsley , 7 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 8 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 9 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 10 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 10 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 11 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 11 hours ago

