Last seen: Apr 8, 2024
@derek-m Jamespa, Derek-m, Bontwoody, Guthrie, Toodles, Mars, Majordennisbloodnok, thank you for your help to date. The ASH is now up and running ag...
@derek-m Thank you. Looking again at the photo the pressure release valve looks like it is set at 0.5 which also looks is the highest setting (?).
@derek-m Thank you all. As you've all pointed out given the date of installation it can't have been registered for the FIT scheme.
@guthrie thank you - will check which pipe pressure gauge is on. The pressure release is as you say labelled Auto bypass.
@derek-m See photo attached?
@derek-m - should I assume an FIT meter has FIT emblazoned on it? Will go and take a look but if they are standardised be good to see what one looks l...
@bontwoody Thank you for taking the time to do the search. I really appreciate you doping that. Just looking on line (and this is all new to me) it lo...
@derek-m Further to your suggestion of tracking down the 3 way valve I came across these three items on the journey and wondered what was the function...
@derek-m I have checked the pipe work flow and as you identified the darker insulation is for the thermal solar and the lighter for the Heating and Ho...
@derek-m thank you for the observation and guidance - I hadn’t even noticed the difference in insulation until you mentioned it. Will track and report...
@bontwoody thank you - TR4 and I think the capacity stated on the pdf notes I posted was 5.525 kWp ?
@jamespa thank you for the clarification. I think I need to sit down and summarise all the info you have all sent and develop an action log for mys...
Latest Posts
-
RE: Weather compensation- why you should use it
Whilst I'm sitting looking at my woodburning stove, @to...
By Majordennisbloodnok , 8 minutes ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
Your installer is probably right. The L9 error means l...
By JamesPa , 15 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
Perhaps the link only works when logged in.. I will i...
By Batpred , 20 minutes ago
-
RE: New Fogstar 15.5kWh upright solution
Thank you. No-one did. You posted some links to ...
By Majordennisbloodnok , 22 minutes ago
-
Just realised that this image of the cylinder cupboard ...
By Sheriff Fatman , 32 minutes ago
-
RE: Rodents! A word of warning for heat pump owners
Two thoughts: 1: Let's ask @david-s if Primary Pro in...
By Transparent , 49 minutes ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
In the diagram below, I describe my understanding of th...
By Batpred , 1 hour ago
-
RE: Running from backup generaor in powercut?
@batpred Thanks for the warning. definately a job for a...
By Pipcart , 1 hour ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@editor Mars, First of all thank you for your enco...
By Wally , 2 hours ago
-
I need to have a look out for it. I know IBM feeds some...
By Batpred , 2 hours ago
-
-
RE: Daikin Atherma ASHP Cycling 6 Times an Hour?
Thanks for your reply. Yes that's a good idea to try a...
By John Marshall , 8 hours ago
-
RE: Hot water heating in parallel with space heating
An external heat exchanger would need a pump which woul...
By bontwoody , 8 hours ago
-
RE: Gen 6 Samsung ASHP losing 20C of DHW in 60 min directly after generation
@ecobaker Thanks for this. I've had it in both slots. ...
By andbeck , 18 hours ago
-
RE: Air source heat pump circuit not operational
Welcome to the forums. If the thermostat shows it’s c...
By Mars , 18 hours ago
-
RE: Ecodan with FTC7 - True Weather Compensation
@danwright90 I've linked two videos below recorded this...
By Sheriff Fatman , 21 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
That makes plenty of sense. Perhaps more importantly, O...
By Majordennisbloodnok , 22 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
It does but it almost all applies to boiler systems and...
By JamesPa , 1 day ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
So theres a problem for starters. This means that the ...
By JamesPa , 1 day ago
