Last seen: Oct 6, 2025
@sunandair Picture of one of the pumps below. The other on the adjacent pipe is upside down of this. They both seem to operate at the same time when...
Any idea what's going on here?
I have 2 pumps. Radiators and DHW. I do very much appreciate all and any help and advice but be aware I'm not very tech savvy/confident.
@derek-m I have two pumps in the same cupboard as the main gubbins and DHW cylinder but I have no idea how to change the anything on them. My DT is a...
@sunandair I've done a 540 enquiry (posted earlier). 21LPM at setting 5. The same at setting 3 so it appears that I cannot change the flow rate. Th...
@sunandair Have changed the display to ROOM & TANK and the display is as it should be. Phew. However the rads are way hotter now than in WC and t...
@mjr sorry there was a clue in your question. My bad.
@mjr Where do I find that information? What part of the screen?
@cathoderay Paragraph three and that's me done and out already 🤣
@kev-m I was referring to the main controller showing temp's to indicate that AA is active. The wireless one is fine.
@sunandair You will see from the attached pic's that the small temp' figure is missing. From the earlier vid' on how to set AA that needs to be pr...
It probably was mild enough not to require heating. Certainly not turned off.
Latest Posts
-
RE: Samsung Heat pump with Yonos Pico circulating pump running all the time
Looks like you have a 25L buffer vessel, so I'm guessin...
By Old_Scientist , 4 hours ago
-
@bontwoody you’re joking! This story gets worse and wor...
By Mars , 4 hours ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
If you do suggest you consider repurposing it as a 2 po...
By JamesPa , 5 hours ago
-
-
RE: Say hello and introduce yourself
Fully agree with @cathoderay. My journey took 2 years ...
By JamesPa , 7 hours ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
@editor Agreed. There is another point to be made h...
By JamesPa , 15 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
Tim, Yes ChatGPT thought I could get another...
By Mike Patrick , 15 hours ago
-
RE: Enabling WiFi: Samsung ASHP on Smart Things App
No problem, @richdorm; glad it helps.
By Majordennisbloodnok , 17 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
If that makes you feel happier then go ahead, but it wo...
By JamesPa , 17 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I do already have the same basic setup, all room influe...
By cathodeRay , 18 hours ago
-
RE: IVT Greenline high pressure switch and electrical cassette errors
OK. You dont say whether it is from the feeds to/from ...
By JamesPa , 19 hours ago
-
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?
Yes, and probably also Adia although the latter has a m...
By JamesPa , 1 day ago
-
@editor I am all in favour of provocati...
By GrahamF , 2 days ago
-
RE: How to Understand Wiring Up a Heat Pump
Morning, On top of what everyone else I would deffo loo...
By Grantmethestrength , 2 days ago
-
RE: Sizing a heat pump: Save me from my headache
Got the results back from the one we’re ...
By Mikeatthezoo , 2 days ago
-
RE: Renewables & Heat Pumps in the News
Thanks Lucia. I'll set aside some time to go through th...
By Transparent , 3 days ago
