Last seen: May 19, 2025
I just the pressure and then ran every tap on the house on hot for 5 mins and then turned them all off. It seems to have settled now. the noise has...
@fazel yeah, still flowing out. It made a noise a minute ago there like a locomotive horn! Turned the tap on and it stopped. there must be air in i...
One thing that is winding me up generally also is this it only explains what 6 of these 15 symbols are. I have the wee face with the shushing figu...
It connects to here, definitely. I felt by reaching and traced back. If I turn the blue to the right, the whoosh increases.
@derek-m yes, I’ve turned this before when it started whistling a bit.
@derek-m it goes straight through the wall seemingly from the cylinder but it’s hard to see the full workings now with the cupboard.
Water temp now up to 39 but still cold out of tap while this whooshing noise and outside flow continues.
It seems to connect to a pipe which runs to near to the top of the cyclinder. and connected to this. The noise would appear to be cold water coming ...
@derek-m seems to be warm water. Weird. The hot water is on a top up cycle and stuck at 37 degrees while it does this. if I turn on a hot water ...
Can anyone hazard a guess as to why water is coming out of this wee pipe outside my house? I remember the engineers referred to it as the “run off” or...
thanks Ally, much appreciated.
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 233 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
Hi everyone, I have a two year old Marlec Solar iBoos...
By Tallmarc , 12 minutes ago
-
RE: Please help with the settings ecodan
Are you trying to address any particular performance is...
By Sheriff Fatman , 6 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
🤣 Well, I never managed to get the HA solis "...
By Batpred , 7 hours ago
-
RE: Experience - New Build / Complete New Heating System
Your sap clculations should give you a heat loss figure...
By JohnnyB , 8 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@editor hmmm, our engineers Rae, Craig, Naz, Rob and Ry...
By ASHP-BOBBA , 8 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@editor Hi Mars. I totally agree with your comments. ...
By Richard24738 , 8 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
Indeed! And my apologies, I should have expected you...
By Batpred , 9 hours ago
-
RE: I’m glad the cold spell is over!
@editor as a reply for this date the 6th of Jan in o...
By Nursethescreens , 10 hours ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 10 hours ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 11 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 14 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 14 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 14 hours ago
-
RE: Rate the quality of your heat pump design and installation
Well, the guy came out, turned the heat pump to max, we...
By razz , 14 hours ago
-
Midea R32 setup and bizarre running with lengthy off periods?
Hi I am new to the world of ASHP and have just had a re...
By Countryman Helmsley , 15 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 15 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 16 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 17 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 18 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 18 hours ago

