Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 16, 2026
I applaud you for this initiative; however, I can see a problem with the Heat Geek offer (compared to, say, Octopus, CB Heating; Aria etc). The Hea...
Three months on, I am getting the impression that my installer is no longer fully engaged with the Heat Geek model. This morning, one of his lads came...
@david-s Thank you. That is very helpful. Do you have a link to the joint covers?
@ashp-bobba The vertical pipe rise from the heat pump is about 2M to just above the back door. I cannot see any other broken butt joints or stress poi...
@jamespa I told that it is Primary Pro insulation which is suitable for external use as supplied by HeatGeeks. My installer has just got back ...
Thanks both. I have turned my heat pump space heating off and we will see how it goes over the coming week. I am sure that my wife will be happier and...
@batpred As my installation survey was carried out under the HG assured warranty scheme, my installer didn’t get much say as to the size of the heat p...
@batpred As my installation survey was carried out under the HG assured warranty scheme, my installer didn’t get much say as to the size of the heat p...
@jamespa Thanks that’s very helpful. My installer has left room temp mod inactive. The handover comprised two short phone calls so I am still ‘self le...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 1 hour ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 2 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 6 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 7 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 8 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 10 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 11 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 11 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 1 day ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
SPONSORS
