Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 16, 2026
I was told that installer doesn’t get to see the system design temperature until commissioning is complete. I can live with that given the minimum gua...
Update. My SolarEdge inverter was replaced yesterday with a 10kW model (limited to 5kW). The replacement is a much bigger unit with cooling vanes at t...
Resurrecting an old thread. I got a call from MCS this morning asking me to agree to a visit/audit. As I have had to call my installer back to resol...
With the Powerwall 2 or 3 with a Gateway, grid voltage and frequency monitoring, and Grid disconnection is outwith the end user’s control. The same ...
If there ever is an under-voltage situation, the PW3 plus Gateway 2 will take my home off the grid. As far as doing anything else is concerned, the fo...
My high voltage ‘fault’ had nothing whatsoever to do with my solar inverter or Powerwall 3. My Powerwall 3 took the Grid offline at night with a volta...
Installed inside a garage. Installation date September 2020.
When there has been underinvestment in our infrastructure for decades and there are a massive number of new connections it is hardly surprising that t...
@transparent By asking SPEN to access my smart meter voltage data it could be argued that I gave them permission to do so - as is the case with third-...
It was three years ago but I recall that the SPEN Regional Distribution Manager sent me a copy of the 30 minute voltage data downloaded from my smart ...
DNOs are Registered DCC Other Users and they can download voltage data from smart meters. There is no need for a supplier to be involved in the proces...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 52 minutes ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 1 hour ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 5 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 7 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 7 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 9 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 10 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 10 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 24 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
SPONSORS
