Forums

Forums
Members
JamesPa
Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Aug 5, 2025
Profile Activity
Topics: 17 / Replies: 2675
AllTopicsReplies
Reply
RE: Low Loss Headers and Buffer tanks - Your experiences wanted

@toodles Thanks for this. I was working on a 'how to fix an LLH/buffer tank without removing it' script and more or less got, in my thought process...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant

@declan90 Be aware that this might impact COP negatively as you are aiming to increase the emitter DT. In principle higher emitter DT = lower av...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant

I note 21 degrees specifies a 25l buffer tank. I would check, if you haven't already, that this is 2 port not 4 port. I would not accept the proposa...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Compute heat loss from energy used

Radiator manufacturers publish the volume of water in their radiators. For any given height and type its proportional to length so they often just gi...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Compute heat loss from energy used

Re the Ebac heat pumps The heading on the table is presumably meant to be kW not kWh! - the 9kW one will be cycling almost continuously with a min...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: (How) does your heat pump control its water pump?

Thanks, thats helpful And painting the outside black... The UI for many makes has not, IMHO, been designed or developed with the user in mind. ...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Compute heat loss from energy used

OK so assuming a base temperature of 15.5, -2 will be 17.5 degree days. So your heat loss at -2 is roughly 3.5*17.5/24=2.6kW which is consistent with...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

OK, further to the above (which please do read as its about a different and possibly equally important topic) this plot is a bit of a goldmine! ...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

Thats good data. I will compare heating COP (which doesnt seem too bad) with mine later today and make some observations, but I think its worth takin...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Database of heat pump performance data?

is it possible that the testing regimes are different (eg a different seasonal OAT profile?)

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: (How) does your heat pump control its water pump?

Thanks that's helpful. So what do the smaller units do when the demand is <2.5 kW. If the compressor can and does go lower (which you impl...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Help for newbie Samsung ASHP owner

I dont know as I dont have a Samsung. I looked quickly through the manual and its there, but TBH it didn't seem as straightforward as one might hop...

4 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 45 / 225
Share:

Join Us!

Podcast Picks

Latest Posts