Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 23, 2026
@transparent If you do provide the link note that the topic begins on another tack (mostly to trigger discussion, partially because there might be som...
@transparent In another thread the following set of measures emerged (with a fair level of agreement) to open up the market and release MCS from its s...
I thought MCS was supposed to ensure that the industry has high standards, or at least that's what people keep telling me. Am I wrong or is it failin...
@batalto well that's scuppered the explanation I had in mind for why heat pumps are more efficient at low temperature than at high temperature, and wh...
Picture of a bottom discharge hopper wagon courtesy of Peco
Its not a bad analogy However the coal is offloaded at the radiators through the bottom of the truck, so the amount offloaded (deltaT) depends on...
Surely its more likely that @cathoderay adjusted his wc curve with the PHE in place, so the settings already take account of its effect. Of course, a...
I can certainly agree with that. I reckon that there are a fair few PhDs in 'optimised' control of heat pump central heating systems under various se...
Even a lossless PHE will reduce the system efficiency because the flow on the CH side is necessarily colder than the flow on the CH side and thus the ...
You are mixing up cause and effect. The heat delivered by the heat pump to the system absolutely is equal to (mass) flow rate * specific heat capacit...
@cathoderay Reading the above I think there is a large measure of agreement that the difference in operating conditions vs the oil boiler, and ...
One further comment occurs. We know that cycling is bad news, but we cant quantify how much effect this has when the unit is below minimum output. ...
- 27 Forums
- 2,774 Topics
- 65.4 K Posts
- 4,764 Online
- 7,177 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Solar Power Output – Let’s Compare Generation Figures
@downfield I was seriously considering Tide Lifestyl...
By Papahuhu , 8 hours ago
-
RE: Passiv Smart Thermostat - Help & Forum Support
Thanks Will. I'll probably be a week or so before get...
By Singlespeed , 10 hours ago
-
RE: Cooling using an air to water heat pump
From experience this summer, a single-split A2A unit on...
By Rob of York , 17 hours ago
-
@mrkfm, I’m definitely not trying to put anyone off get...
By Mars , 1 day ago
-
RE: Why are ASHP installs so expensive?
Posted by: @springswood I confess to becoming a litt...
By Rob of York , 2 days ago
-
Analysis of the economics of switching to an A2W ASHP compared to other heat sources
This post aims to analyse the economics of installing, ...
By Rob of York , 2 days ago
-
RE: Cooling with air to water heat pumps
@editor does that mean you have to have two separate ex...
By mrkfm , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
Posted by: @ian-s Could always use the money saved o...
By Rob of York , 3 days ago
-
Depends on what controls the pump! Thats the whole poi...
By JamesPa , 3 days ago
-
The positive reviews keep coming in for Britain's Heat ...
By Mars , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
I have one of these fitted which also allows you to reg...
By Old_Scientist , 4 days ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
If they can't don't give up. Heat pumps are, in reali...
By JamesPa , 5 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes that's what would happen by turning down the lsv to...
By JamesPa , 5 days ago
-
RE: Grant R290 DHW Cycle Interuption
It looks like some sort of short pre-run. The question...
By JamesPa , 5 days ago
Members Online
No online members at the moment



