Last seen: May 1, 2024
@robl I've added the screens. Li-Bms screen is accurate. Sunsynk screen shows a +0.3V difference between it and battery. Also shows voltage s...
@robl Ill take a photo of the screen tonight & also in AGMV mode - From memory, it is set to 56.7V - Unless i factory reset/run it in AGMV ...
@chickenbig Sunsynk support claims that Pylontech is not supported. Tho the BMS screen on the inverter is properly populated with the correct...
SITREP #5 No improvement on the system. Everyday, it is charging 1% less. Today was 84% then stopped charging. User timer set to 100%SOC. I'm ...
@misterb @vaugi OK, I'll contacted Fogstar Were I fall down that it is the battery - is that when the Sunsynk is factory reset - it charg...
@misterb @robl SITREP #4? Blimey, what haven't I tried Voltage mode, wasn't working very well. It's a bad SOC replacement. I tried every single...
Interesting review. Good timing for myself. Will be driving one shortly - how did you find space in the i4 - anyway bigger than expected?
SITREP #2 Progress, but not logical progress on the Sunsynk. So I changed the Sunsynk over to AGM-V Good - I was able to charge to 100% and...
Hey I ran active balancer for the first 3 cycles. Voltage on the screen looks in good shape per cell. Figuring out the Sunsynk however......
Ok, I have ths mode turned on. How did you know what voltages to set on the inverter?
SITREP 1. Evening charging seems fixed. Adjusting the shutdown, low battery and restart fixed that. Apparentl y the inverter wil...
Grid Charge in battery setting is the 1 I suspect. Note - tried many setting to get it to stop charging this evening. I don't think I'd bu...
- 25 Forums
- 1,442 Topics
- 30.2 K Posts
- 31 Online
- 1,225 Members
Join Us!
Latest Posts
-
-
RE: Are Octopuses Slowing Consumer Adoption of Heat Pumps?
Yes, it is one of those two who first alerted me to the...
By IvanOpinion , 4 hours ago
-
RE: EV charger installation question – I don't want to bury the cable
The fact that the MCB is rated 16A tells us what we nee...
By Transparent , 4 hours ago
-
RE: Are You Getting the Most Out of Your Renewable Energy?
Thanks, @editor. Ideally it’d be someone who would li...
By Majordennisbloodnok , 6 hours ago
-
RE: Jokes and fun posts about heat pumps and renewables
Unless adequately controlled it could devour your bank ...
By Derek M , 7 hours ago
-
RE: Effect of buffer tank or volumiser on heat pump system
I think that you will find that the best location for a...
By Derek M , 7 hours ago
-
RE: ASHP Commissioning: What Questions Should I Ask the Installer?
@derek-m thanks - will look out for the point regarding...
By Declan90 , 24 hours ago
-
RE: Noise problems with newly installed Samsung 8kW ASHP
@editor @kenbone Thanks, I would be very interested ...
By Elton , 1 day ago
-
RE: No-code, plug-and-play monitoring for your heat pump
This is all a bit too frequentist for my liking. The pr...
By scrchngwsl , 1 day ago
-
Relax with 4K drone footage of lawn mowing to a smooth Motown tune
Sending out some chilled weekend vibes to everyone. Lis...
By Mars , 1 day ago
-
RE: Incorrect Billing of Customers with a Smart Meter
The starting point of that discussion on Camelot-Forum ...
By Transparent , 2 days ago
-
Share Your Experiences with Heat Pump Manufacturer Support
Have you ever reached out to your air source heat pump ...
By Mars , 2 days ago
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
@ant87 thanks for that.
By David999 , 2 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
I might change my mind again, but I'm currently unlikel...
By IvanOpinion , 3 days ago
-
RE: Samsung ASHP scheduling help
@elgreco69 worth reading the GitHub here as that will a...
By morh , 3 days ago
-
RE: ASHP sizing - value of Heat Transfer Coefficient
@toodles Thanks for the explanation I get it now as I h...
By Jancold , 3 days ago
-
RE: Questions about yearly heat pump maintenance
For the installer, I believe servicing and maintenance ...
By Majordennisbloodnok , 3 days ago
-
RE: Rate the quality of your heat pump design and installation
@retrorich It is very worrying that any of this should ...
By Toodles , 3 days ago
-
RE: Spacing for roof fixing bolts ?
There is another consideration...but alas this doesn't ...
By Transparent , 3 days ago
-
RE: Air source heat pumps and noise
Yes, but when they go wrong things get really sticky. D...
By Majordennisbloodnok , 3 days ago
Heat Pump Humour
Latest Topics
-
By David999 3 hours ago
-
Spacing for roof fixing bolts ?
By heat-pump-newbie 6 days ago
-
ASHP sizing - value of Heat Transfer Coefficient
By jamesw 6 days ago
-
Incorrect Billing of Customers with a Smart Meter
By KoRWraith 1 week ago
-
Home energy storage & battery register
By Mars 1 week ago