Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 20, 2026
I think this was resolved last night, it was for me anyway
@sheriff-fatman Yes, that's a good point - this conversation is related only to the Beta feature of the onboard compensation curve Further to that, ...
I reviewed some device logs and there is a mistake in the JSON schema being sent by MELPump so the adapter is not taking any action on it.
@sheriff-fatman has a meltdown when it has to adjust slightly at 5°C and starts cycling I have a similar sort of issue, although at a slightl...
Ours was £132 in 2023,As there is no highly flammable (R410a) or parts that if failed could be particularly dangerous in my unit, i decided to service...
@davidalgarve I have never made a conversion from standard to large personally, I presume you Service > Thermistors page already shows THW5A (up...
Mode RestrictionFor ease, let's assume you have no schedule and hot water runs purely on meeting the temperature drop parameterSay you have just finis...
@patch321 The recommended is 32L/min.... The range for the 11.2kW unit is 14.4 to 32.1l/min This may not pose a significant issue in compar...
Throwing ideas out there, to protect pipework if they use a particularly large primary circulation pump on the 11.2's and someone does increase the sp...
This is the 'OUTLET' from the external unit yes (so flow, before 3 way valve), as the magnetic filter is shown just below
@patch321 No, not standardThe valve below it is the end of the Pre-Plumbed cylinder, this has been fitted by your installer
In the Home Assistant firmware the data points are between 2s and 25s depending how important the values are, e.g. compressor frequency, flow...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 4 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 15 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
