Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Hi Kev, It would appear that you can deactivate the 'freeze stat' function as shown below. Freeze stat functionMenu subtitle Function/ Description...
@cathoderay Thanks for that. In SCADA systems there are normally two ways that data is passed from computer to computer, one is by timed polling o...
Assuming that the original heat loss calculations were reasonably accurate, at an outside temperature of 2C, you should expect a heat loss of approxim...
Sorry, it is per hour, but only when it is -2.2C outside. At -5C it will be more. 😋
What made me question your installation, is the water pump is normally located on the return pipe, but it will still work on the flow pipe.
If the pipes going through the wall on the left-hand side of the photo are going to the heat pump, I would suggest that you check which is the flow an...
@cathoderay To answer your first question. but if it puts it the 'next time slot in the Cloud record' then why doesn't the bar displayed in the 18...
I assume that you are changing the water pump speed on the FTC controller, but if the actual water pump is not wired the controller, then changing the...
I would have expected that the above should have been set by your installer, for example, if you have a 3kW immersion heater installed then the releva...
Looking at the photo I suspect that the upper sensor is not making good thermal contact, particularly at the end section where the sensor is often loc...
As you stated, an ASHP does not magically take a 'dollop' (technical term) of energy and multiply it by 3 or 4. When operating at a COP of 3, a heat...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@editor I completely forgot to document wha...
By Burtis , 3 hours ago
-
RE: I need help with Ecodan ASHP
@f1p It turns out there have been a solar panel install...
By Andris , 6 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews your installer would be right to say that the...
By GrahamF , 6 hours ago
-
RE: Vaillant ecoTEC Plus - Flow Temp and Set Up
@trebor12345 That curve looks healthy to me. I woul...
By JamesPa , 8 hours ago
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
Actually, that's a very important point. I've only ev...
By Majordennisbloodnok , 14 hours ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders can I just add to @rob-of-york s comm...
By JamesPa , 18 hours ago
-
RE: Aerotherm and weather compensation
These are likely inked. The basic explanation is tha...
By JamesPa , 18 hours ago
-
RE: Electrical works for air to air heat pump
agree with above. I have not had extra costs added wh...
By Batpred , 19 hours ago
-
Good to hear that you found a solution. Absolutely a...
By Batpred , 20 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 1 day ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 3 days ago
-
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 4 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 5 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 5 days ago
SPONSORS
