Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Don't apologise for lack of information or knowledge, I am still learning, and revising my thoughts, when it comes to home heating systems. If you can...
@cathoderay I forgot to ask. Which of the data that you are obtaining at the moment is on an hourly bases, so possibly monitoring the hourly transmi...
@cathoderay No problem, I will go through the code as time allows, and send proposed changes that you can try out. What additional parameters are ...
You are correct. It is not just a matter of adding code in the C3 Devices routine, code also needs to be added in other routines, which is why I was w...
@cathoderay I have been having a closer look at the midea_ac_lan software, to see how it may be possible to make additions to capture the missing he...
@toodles Thank you.
I can't help much with family member's leaving windows open, other than suggesting that you hand them the next bill to pay. I suppose that you could i...
If your multimeter has a resistance range, then remove the fuse and check for continuity. If the reading is showing open circuit, then obviously the f...
With your system a water pump for the UFH would always be required to allow mixing to take place to limit the water temperature, but you may not have ...
I suspect that most heating systems, whatever the fuel source, will not be configured or operated in the most efficient manner, so one more will make ...
@marzipan71 It is my understanding that a low loss header is like a thin buffer tank. What made me suspicious was the fact that you have three wat...
You are perfectly correct, it is your house, your system and your family. Please do whatever you feel is best and by all means ignore what I have said...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adding additional Solar Panels to a DC coupled battery system
Let's deal with mounting systems first. You don't hav...
By Transparent , 2 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 19 hours ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 23 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 2 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 2 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 5 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 5 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 5 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 5 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 6 days ago
SPONSORS
