Last seen: Nov 13, 2025
Thanks James. I'll keep experimenting. I suspect a spreadsheet that supplements the WC reckoner someone made (apologies every time forget who it was...
Plumber attended today and "balanced" upstairs radiators, didn't check any temperatures or anything, just a case of closing down those closest to ASHP...
Update on this. It irked me that the plant room pump had to be on 1/3 not 2/3 so reached out to plumber and asked if the Grant ASHP speed had changed...
It seems opening them back up does reduce the temperature. Which makes me wonder if the rate at which the water passing through is too fast? Certain...
Out of interest, does anyone have an idea why in the hottest performing room, turning the rads down (basically closing down the lock shield equivalent...
So now I’ve come to the conclusion the rads are now correctly sized (did hope so as according to calcs they’d be very much oversized, just purely phys...
Going to be a struggle, already complaints upstairs is too hot at 19-20C. Ive now had to turn all the hidden Drayton balancing down to 2/6. And have t...
Thanks James, it’s a 13Kw. It’s definitely cycling. Only difference this time is hits 20c rather than 18.5c after radiator upsizing was done recentl...
Thanks James, I do wonder about that LLH. It appears the challenge Ive always had still remains. The Eskimo rads seem to work very well at low tem...
As a summary I had numerous issues with the heat engineers/plumbers on a project that was an extension and full re wire/re plumb and re insulate proje...
@kenbone I’m Suffolk based
- 26 Forums
- 2,283 Topics
- 51.1 K Posts
- 204 Online
- 5,944 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Faulty Clivet heat pump out of the box
@steveimpey as a short term "fix" have you tried turnin...
By Sune , 4 minutes ago
-
I was thinking something similar to the OP half way thr...
By RadWhisperer , 10 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@technogeek Couldn’t agree more! Years back, we were wi...
By Toodles , 42 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
The Samsung app is pretty user friendly, but has some l...
By JamesPa , 58 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
The double panel radiators I’ve seen have a bleed screw...
By AgentGeorge , 2 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@nickhorne Unfortunately not. We take the "normal" IOG ...
By HCas , 12 hours ago
-
RE: Mixture of copper and plastic CH pipework. Will it be ok, or need changing?
In principle yes. Some heat pumps (I think including D...
By JamesPa , 13 hours ago
-
RE: New Fogstar 15.5kWh upright solution
For the common benefit, a quick update on this. Fogs...
By Batpred , 13 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Some of the circuits in my home are not protected by RC...
By Batpred , 13 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Aqara sells some inexpensive hubs (usb dongle size) tha...
By Batpred , 15 hours ago
-
RE: Extend the colder range of the weather compensation curve?
@thebinman In answer to this and personal...
By TechnoGeek , 16 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
And here is what the Homely plots say for the last few ...
By Toodles , 17 hours ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard That's probably fine, provided as you say...
By GrahamF , 23 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
16Kw AIROSD Manufacturer: Foshan Model: QBKFXFC-...
By Polar bear , 1 day ago
-
Just a suggestion but upload your images to an AI agent...
By RadWhisperer , 1 day ago
-
RE: Daikin Wireless Thermostat
The switch from WDC to LWT i.e. pure WC is fairly strai...
By RadWhisperer , 1 day ago
-
RE: Bosch CS5800i 5kW - Experience So Far
Thank you for your continuous research, and posts. As y...
By ectoplasmosis , 1 day ago
-
RE: Trying to understand my Nibe F1245
@barry-sharp, is this something you could help with?
By Mars , 1 day ago
-
I signed up for this, I think it will be a good one. Al...
By ASHP-BOBBA , 2 days ago


