Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 12, 2024
DESNZ have published "Air source heat pump noise emissions, planning guidance and regulations" research.
Isn't the report in question linked by the corrections article?has figure 8 which shows for Q=4 and direct line of sight to the heat pump from the ass...
@transparent MCS-020 is somewhat site-specific (the distance to assessment position, the Q value, whether the boundary wall is solid and obscures the ...
(As an aside, I would find going through this topic somewhat easier in a pub rather than online ... every sentence written is preceded by about 10 wri...
(I've been trying to think of a polite way to disagree with this assertion ...) Such a way of operation would require a clear and stable multi-electi...
Shouldn't this be a direct function of the DESNZ?/p> Our responsibilities delivering security of energy supply ensuring properly functioning e...
Are they being paid through some sort of Regulated Asset Base scheme? The higher the value of assets under ownership the more they can charge the publ...
Where has the DT got the £19 billion figure from? The National Grid ESO pagehas the printable report, and the executive summary point 3 states £21.7 b...
Nothing wrong with that software; the Post Office management were fully behind the Fujitsu contract, their processes and delivered software. Dodgy peo...
I suppose this is where consumer acceptance of variability comes in. Intentional charging (setting requirements) may be a good way ahead but requires ...
I think de-electrification of heat would go a long way towards that. There is a lot of talk on LinkedIn about district heating/heat networks. The Ener...
- 27 Forums
- 2,748 Topics
- 64.7 K Posts
- 2,905 Online
- 7,155 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 14 minutes ago
-
That's consistent with your heat loss calculation. Yo...
By JamesPa , 24 minutes ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 13 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 14 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 22 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 22 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 24 hours ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago



