Search with Wattson
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

Resilience

50 Posts
10 Users
8 Reactions
366 Views
Toodles
(@toodles)
Daikin
Famed Member Contributor
Joined: 4 years ago
Posts: 3085
 

@jamespa I have found that ‘Arbitrage’ is a time consuming and risky enterprise; i use the storage for TOU purposes mainly. I have found that there are too many ‘gotchas’ to make chasing the import / export game ‘safe’ in resilience terms. During the solar production months, I keep the battery full during daylight and export any excess - that’s it! Rewards, Toodles.


Toodles, heats his home with cold draughts and cooks food with magnets.


   
ReplyQuote
Majordennisbloodnok
(@majordennisbloodnok)
Mitsubishi Electric
Famed Member Moderator
Joined: 5 years ago
Posts: 2234
 

Posted by: @jamespa
↑

So I have, amazingly, got an almost tolerable quote fir a battery system (£k5.2 for 16kWh fully fitted).  

This got me thinking.seriously. 

Most of us fit batteries for time shifting which means that they spend a lot of the day empty.  Sods law says that they will be needed for resilience when they have been drained for tou shifting.

So does a home battery which basically is used for time shifting really offer resilience?

Limited I would say unless you restrict the depth of discharge.

Hmm!

It's a good question but I'm not sure I agree with your assumption.

Since time shifting relies on tiding you over expensive periods, the emphasis is on hoarding when it's cheap. As a result, I don't think the battery spends a lot of the day empty, but i is either full or tiding over an expensive bit. Obviously, if a power cut happens at the end of an expensive stretch then your resilience is reduced by the amount of power the battery has already lost but that's the tradeoff we live with.

In contrast, arbitrage - trading on the grid market, if you will - is all about trying to ensure the battery is as empty as possible at the start of the cheapest import stretch so you can buy as much as you can at a low price, then discharging as much of it as possible - as quickly as possible - at the point of peak export rate. This is far more likely to leave you in the lurch if a power cut comes along since, as you say, rather more time is spent at a relatively low state of charge.

Of course, which strategy works for you is highly dependent on which tariff you choose and how comprehensively your inverter/battery can be managed, which brings into play your appetite for different automation mechanisms (manual intervention, clever scheduling, full-on home automation etc.). However, if resilience is fairly high up on your priorities list, that certainly doesn't preclude you from working your battery hard as well; it's just a matter of where on the compromise scale you sit.

 


105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs

"Semper in excretia; sumus solum profundum variat"


   
ReplyQuote
Page 5 / 5
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO