Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 13, 2026
Looks beautifully integrated.. We had our done as well.
@judith @jamespa Our installer used screed drying mode. I think that does not deliver heating to the house. Appreciated since in this case, it woul...
We are currently having our Arotherm Pro 7kw installed, with all wired options. The pro version of the 75 model is a bit more compact than the new plu...
There seems to be some info at/p>
@jamespa I was given the Installation and Maintenance instructions for the Pro (v 7.1, new Plus is 8.1). But the corresponding table has no explana...
Each could be different and there will be some level of configuration in each. If energy from the PV cells is not harvested, it is lost, that is handl...
The tab shows after a few secs. I tried to reach them including with the chat. It would be useful to get some info on the survey and focus group. ...
Clearly my assumption was you did not have a CU dedicated to the Powerwall! One would hope that installers dealing with expensive kit would be bette...
I agree, the article is naive in many respects. Which? should be more careful when encouraging people to do the right thing..
I am not familiar with the powerwall inverter but when converting to DC it may cause some DC currents to flow upstream like other inverters. Difficult...
My octopus agile export rate has minimum pay of 10p/kwh, including overnight (when I can buy at 3.5). Shame that the meter offsets consumption and pro...
True that the we are not investing enough in the young.. On the pensions that retired people get and do not need, if they would be channeled to the yo...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
I agree. However I would also (primarily) expect that ...
By JamesPa , 3 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 6 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 10 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 12 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 16 hours ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 17 hours ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 1 day ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 1 day ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 2 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 3 days ago
SPONSORS
