Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 13, 2026
@etchedpixels Thank you. From what I see, it covers all building trades. VAT registered contractors or subcontractors can supply and install items ...
That is interesting. My understanding was that, to be VAT-free, it would need to be for renewables, so the installer would need to be registered with ...
Understand the frustration with a less common heat pump gas. Seems like these may help, they appear to be based in Ilford. Unusual to market it via eb...
@transparent I also double checked and it does not seem this Solax inverter can use low volt 48-52V DC batteries. If it did, it could be an option ...
Thanks, the WAPs are using wifi 6 with Mu-Mimo. What we will move to..
Yes, it is either that some of the broadband side it not recovering (or not fast enough) or that the wifi WAPs are not reconnecting quickly enough to ...
The diagram looks fine to me. When I had my export approved by Octopus (after the DNO approved it), I may have provided something showing the consumer...
I am half guessing, but perhaps you would just need a simpler method to force a restart of the PoE WAPs after your broadband is restored. My intern...
This could be a better thread for a discussion on electricity rates. I would be surprised if Gas CCGT would be a massive contributor to enable chea...
We had various types of insulation fit including ewi some iwi and some breeze block with ewi and iwi and following building standards. But no eco4.....
That could be worth, as a new inverter may give you more ability to export more when it makes more financial sense. Personally I avoided full DIY b...
I was going to suggest getting an SPD on your consumer unit (or a new unit) which would protect from damage but if I understand it right, none of the ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
OK perhaps my original statement was badly worded if ap...
By JamesPa , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 15 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 19 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 21 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 1 day ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 1 day ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 4 days ago
SPONSORS
