Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 13, 2026
I am still in discussions with the installer about installing FRVs. Had I known how accommodating they were I'd have done that before the LSVs were ...
Thanks @old_scientist I was going to turn TRVs down until I got the result I am looking, but your suggestion to start form zero is a much better id...
@jamespa Thankfully we'd already experienced chrome towel rails and the minimal output that comes from them and had already decided standard type 2...
When I saw the world flawless that immediately to me meant perfect. I was once told aiming for perfection is pretty much impossible, unachievable an...
Thanks @jamespa Yes, I'd be leaving several radiators fully open with no TRVs (all the downstairs ones) and 2 bathrooms as want the most heat in th...
@batpred The Pace BMS also isn't the best with it's balancing algorithm, along with most other BMS manufacturers. Only JK seem to have a handle o...
@batpred I'd change your JK balance start voltage a little lower to give a it a chance to actually balance your cells.
@batpred I would consider changing your balance start voltage a little lower to give the balancer a chance to do it's job.
As a side note I observed the the charge/discharge time window is 10 minutes out of sync. My Inverter is set to charge between 12.10am and 6.50am to...
@batpred As my battery packs were heavily used yesterday and had discharged to 20%, the charge window would mean they'd hit capacity around 6.30am ...
@batpred I reckon Andy might know a thing or 2 about this subject.
Latest Posts
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@swwils mine is mostly off now. Hot water for an hour ...
By AndrewJ , 3 hours ago
-
RE: Setback savings - fact or fiction?
I too agree with what you say, and am grateful to you f...
By cathodeRay , 4 hours ago
-
RE: Vaillant Sensocomfort Time
Thank youy for the pointer. I think I have managed to ...
By ispookie666 , 5 hours ago
-
RE: Forum updates, announcements & issues
I have been doing a lot of work on the site lately and ...
By Mars , 5 hours ago
-
@majordennisbloodnok good advice, thanks for that.
By David999 , 9 hours ago
-
RE: My Grant R290 9kW Heat Pump Installation
I am following this thread with great interest and than...
By TaffontheTaff , 11 hours ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with a website. But you ca...
By JamesPa , 1 day ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 1 day ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 1 day ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 1 day ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 1 day ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 1 day ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 2 days ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 2 days ago
