Last seen: Dec 3, 2023
Right, now I have TW1 at 33c and TW2 at 31c
@derek-m okay, I've decreased it to 1 and have a flow rate of 10 liters per minute
@gary I've turned the pump up to 5 and both TW1 and TW2 are currently at 27c
@derek-m sorry, you have lost me. Its all proportional, I'm just trying to make sure my system is running the best it can. I understand people will be...
@gary yeah the unit is currently running. So I should wait until it stops and see the temps then?
@gary so my TW1 is at 31c and TW2 is at 32c but I also have TW5 at 34c and TH7 at 4c.
@morgan depends how big your home is, mine is 94 square metres. 3 bedroom semi detached.
@gary Hi Gary, sorry in the delay in back to you. I have 14 liters per and pump speed is set at 3. What's the thermostat screen called and where we wi...
@gary that makes sense, would that increase my energy use? Because I would rather use less energy and have a lower COP, then use more energy and have ...
@bontwoody it's a three bed semi detached house. Hopefully it is just reporting it wrong. I'll look at getting the Melcloud app, because by what peopl...
@bontwoody am the moment, I'm running my heating 24/7, well the thermostats are calling for heat 24/7. The heating is going from working to standby ar...
@bontwoody Hi Mark, Yeah my electricity bill does,in total yesterday i used 15kwh , 9kwh of that is heating and water. I'm in Mid Wales near Abe...
- 26 Forums
- 2,342 Topics
- 53 K Posts
- 253 Online
- 6,000 Members
Join Us!
Worth Watching
Latest Posts
-
RE: MELcloud scheduling misbehaviour
No, it gets to set temperature easily even during perio...
By Abernyte , 16 minutes ago
-
RE: Setback savings - fact or fiction?
@robs — is there anything weird in your post or footer/...
By cathodeRay , 17 minutes ago
-
RE: Free Ecoheat Heat Pump Install
Sorry hit 'add reply' too early, this forum layout will...
By Deltona , 1 hour ago
-
RE: Poll for Time of Use, tariffs, technology
@batpred Fair enough, if the usage of these materials i...
By Papahuhu , 1 hour ago
-
And arguably even more important, sodium will be hopefu...
By Batpred , 4 hours ago
-
RE: LiFePO4 lithium battery fires and explosions
All players would normally be expected to be transparen...
By Batpred , 5 hours ago
-
RE: A Smarter Smart Controller from Homely?
I've been thinking of emailing Homely to ask for a few ...
By JohnnyB , 17 hours ago
-
Max output of Heat pump (Daikin 4Kw EDLA04)
Hello, I am a bit puzzled that according to pcdb tes...
By GeorgeA , 17 hours ago
-
In that case, @technogeek, I’d sign up for the free sol...
By Majordennisbloodnok , 18 hours ago
-
RE: Has Anyone Else Noticed a Decline in Tradesmanship?
@cathoderay Hence my rider about ‘all else being equal’...
By Toodles , 19 hours ago
-
RE: Heat Pump Performance Analysis Web App using Modbus Data
@redzer_irl — all my heat pump data is in csv files, me...
By cathodeRay , 19 hours ago
-
That’s not a problem. If you can hit the main landing p...
By Majordennisbloodnok , 19 hours ago
-
RE: Configuration issues with 10kW Midea R32 heat pump
@benson I believe there are quite a few of these instal...
By Toodles , 19 hours ago
-
RE: 10kw heat pump run in 24*7 data?
I would say you most likely do need 10kW. My gas consu...
By JamesPa , 19 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink I managed to find the fault. I did it a lo...
By meehow , 20 hours ago
-
RE: Here is my heat pump installation with questionable COP in Italy
Well in Italy there is nothing controlling the quality ...
By materox345 , 21 hours ago
-
RE: What a Bad Heat Pump Installation Looks Like
@editor The trick to an inside unit installation is to ...
By MikeFl , 2 days ago
-
RE: Different dT on each radiator?
The way heating systems are designed will result in rou...
By JamesPa , 2 days ago

