Good ASHP installation near(ish) Bridgend, Wales
Im looking for someone who would be willing to show around and answer questions from my brother in law and his wife. They have seen my own heat pump installations but a plumber they know has put a doubt in their minds with a misinformed comment about a heat pump not providing enough heat for their home.
They live in an old stone built semi-detached with about 145m2 of floorspace and an annual heating oil use of about 23000 kW/year. Ive estimated his heat loss to be about 8kW. Ideally they would need to see a similar sized ASHP working well in a property like theirs.
Thanks Mark
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
have you checked the heatpumpmonitor.org list for potentials? I'd have thought anyone who's prepared to publish their data is probably also prepared to do a show and tell.
My octopus signup link https://share.octopus.energy/ebony-deer-230
210m2 house, Samsung 16kw Gen6 ASHP Self installed: Single circulation loop , PWM modulating pump.
My public ASHP stats: https://heatpumpmonitor.org/system/view?id=45
11.9kWp of PV
41kWh of Battery storage (3x Powerwall 2)
2x BEVs
@iancalderbank I did Ian, but the entries dont always have contact details. I also looked at https://www.visitaheatpump.com/ but it doesnt seem to be up and running yet.
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@bontwoody I didn't think HPmonitor published contact details at all to be honest, I was more thinking , find one that works , and then post in the openenergy forum "who's is this please?", or politely ask Glyn/Tristan if they can pass a message.
visitaheatpump is a new one on me, do we get paid 😉 ?
My octopus signup link https://share.octopus.energy/ebony-deer-230
210m2 house, Samsung 16kw Gen6 ASHP Self installed: Single circulation loop , PWM modulating pump.
My public ASHP stats: https://heatpumpmonitor.org/system/view?id=45
11.9kWp of PV
41kWh of Battery storage (3x Powerwall 2)
2x BEVs
@iancalderbank You wish! 😆 I will have another look at Openenergymonitor 🙂
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 317 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Vaillant aroTherm not heating with many faults
@anon67 Well its just a few things you can check that r...
By ASHP-BOBBA , 2 minutes ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
…as in Jack?
By Majordennisbloodnok , 10 minutes ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
COP of 3 perhaps a little low and you say that you don'...
By benson , 22 minutes ago
-
RE: Heatpunk Floor plan issues
@jamiejones85 A2A they will design on dynamic heat loss...
By ASHP-BOBBA , 37 minutes ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
I think the concern was about crud being forced from th...
By iotum , 38 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
The usual type of underground cable with a metal 'outer...
By Transparent , 42 minutes ago
-
RE: Rate the quality of your heat pump design and installation
Welcome to the forum and I am sorry you are disappointe...
By JamesPa , 46 minutes ago
-
RE: Fan unit Making terrible noise HELP!!
can you post a video looking inside, at and through the...
By ASHP-BOBBA , 1 hour ago
-
RE: Setback savings - fact or fiction?
Excellent graphics and description Rob…. But to my mind...
By SUNandAIR , 2 hours ago
-
RE: Heat pump not reaching flow temperature
@davec Ive had a look at the screenshots. Lots of th...
By JamesPa , 13 hours ago
-
RE: Power outages and storms: A surprisingly good DNO experience
Agreed, which is no more nor less than a customer shoul...
By Majordennisbloodnok , 18 hours ago
-
RE: Running from backup generaor in powercut?
@batpred In our case, 3 times each day when the Octopus...
By Toodles , 19 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
Hi @sheriff-fatman Cycling at 5C and below is usuall...
By RobS , 19 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Here's the latest Fogstar ready built pack....
By Bash , 21 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
Solis confirmed that the S6 works with a single battery...
By Batpred , 21 hours ago
-
RE: Who has a V2G EV installation
I am wondering if in any V2X, would the car battery eve...
By Batpred , 22 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
OK. I think your system, which seems well designed, is...
By JamesPa , 1 day ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 2 days ago
-
RE: Running my new Nibe ASHP efficiently
I'm new to the forum. Did you get a reply to this last ...
By Mike @ Camelot , 2 days ago


