Search with Wattson

Notifications

Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

Recent Posts

| Forums | Topics

Page 32 / 65 Prev Next

Posts with their shortened content
	RE: Tesla Powerwall (2) Calibration Cycles By Toodles, 2 weeks ago Forum Energy Storage
	@papahuhu No, I don’t have NetZero - bit difficult to justify £7 per month for the little use I would make of it really. Regards, Toodles.
	RE: Solar Power Output – Let’s Compare Generation Figures By ChandyKris, 2 weeks ago Forum Solar Photovoltaic (PV)
	Attachment : Screenshot_20261001_125100_com_android_chrome_ChromeTabbedActivity.jpg It was almost identical to last year for us. After a glorious summer the low generation months have arrived.
	RE: Solis inverters S6-EH1P: pros and cons and battery options By Batpred, 2 weeks ago Forum Energy Storage
	I had a battery and inverter installed a while ago, my payback is just a few years, as I did not go for the MCS accredited staff, etc. It requires some knowledge, specially if you are looking to have ...
	RE: Is This Initial Free Quote From Octopus Trusted Partner Reasonable? By Rob of York, 2 weeks ago Forum Air-to-Air Heat Pumps & Air Conditioning
	@ltron2 The EPC on our house is A-92, however that is because we have a 6.6kW of solar PV on a south-facing roof. Without the solar, it is C-77, so very similar to your C-76 pre triple glazing. We ha...
	RE: Tesla Powerwall (2) Calibration Cycles By Papahuhu, 2 weeks ago Forum Energy Storage
	If you have Netzero, you can check the firmware version and it has a list of current and historical updates. They are very busy with PW2 at the moment, it’s a good thing that they are actively managin...
	RE: Tesla Powerwall (2) Calibration Cycles By Toodles, 2 weeks ago Forum Energy Storage
	@papahuhu Re the last paragraph - Join the Club! Regards, Toodles.
	RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage By cathodeRay, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	One thing a spreadsheet based heat loss calculator can do is allow you to indulge in some deliberate whatiffery, change some values and see what difference that makes, a sort of DIY sensitivity analys...
	RE: battery storage without solar By JamesPa, 2 weeks ago Forum Energy Storage
	@transparent That's most helpful. Essentially the process you outline creates a fixed connection to the ring rather than a spur off the ring. I'm not sure where I read the requirement that the gener...
	RE: battery storage without solar By Transparent, 2 weeks ago Forum Energy Storage
	I'm going to attempt answering this whilst simultaneously responding to the point about busbar current limits by @bobflux Because the OP mentioned Ecoflow Stream 5000 or the DJI Power 2000, I've been...
	RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage By Paul1098, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay Agree. The previous heat loss calc was from 2016 when I was working out heat loss for the Quantum storage heater. I have installed double glazing and new insulated front door since then. I...
	RE: Solar Power Output – Let’s Compare Generation Figures By Papahuhu, 2 weeks ago Forum Solar Photovoltaic (PV)
	Wet and overcast month for us but weirdly a couple of percent up on last year, I’m putting this down to a neighbour removing a tree last winter and the shading canopy letting a little more light in. ...
	RE: Tesla Powerwall (2) Calibration Cycles By Papahuhu, 2 weeks ago Forum Energy Storage
	Mine has always done this, for sure in the past it hasn’t taken into account the import cost. Used to happen loads on IOF, but less frequently now. I understand there is a large PW firmware rollout in...