| Posts with their shortened content | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Batpred, 3 days ago
Forum
Energy Storage
|
|
| The diagram describes what happens inside the Solis. All these relays are electronically controlled by the firmware it runs. By bonding I understand that there is another internal circuit that connec... | ||
|
|
RE: Heat pump not reaching flow temperature
By DaveC, 3 days ago |
|
| @jamespa there are a couple of parameter menu levels, only accessible if you know the correct access codes to get to them; level 1, level 2 and factory. (which we do) I can throw up screenshots of eac... | ||
|
|
RE: Heat pump not reaching flow temperature
By DaveC, 3 days ago |
|
| Thanks @jamespa Yes we are running the heating 24x7, outside of 2x 1 hour intervals to do the DHW set 12 hours apart to try and reduce heat loss in the house. The internal temperature monitoring appr... | ||
|
|
RE: Heat pump not reaching flow temperature
By JamesPa, 3 days ago |
|
| Firstly welcome to the forum. From the preceding posts on this thread you may have gathered that this unit appears not to 'expose' the key parameters in the weather compensation curve. Without that, ... | ||
|
|
RE: New Fogstar 15.5kWh upright solution
By Bash, 3 days ago
Forum
Energy Storage
|
|
| @batpred Here's the latest Fogstar ready built pack. £1849 (although has been cheaper and will likely be cheaper at some point when they have their next sale/discount code). It's the same Seplos V3 B... | ||
|
|
RE: RDSAP10 effect on existing heat pump EPC rating?
By Tim441, 3 days ago |
|
| @mike-patrick yes, even though the current system is rubbish i got my EPCs updated in part with expectation of England adopting the new UK Home Energy Model (HEM)... which will reduce validity to 5 ye... | ||
|
|
RE: New Fogstar 15.5kWh upright solution
By Batpred, 3 days ago
Forum
Energy Storage
|
|
| Clearly, we have to be very careful with comparisons. It is up to each individual or company to decide on what they see as comparable. Having said that, @transparent ´s post above outlines key aspect... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 3 days ago
Forum
Energy Storage
|
|
| On reflection your description (which I understood) made more sense than the diagram (which I don't). The diagram seems to have two contacts/switches in series in some but not all of the connections.... | ||
|
|
RE: Heat pump not reaching flow temperature
By DaveC, 3 days ago |
|
| I have just registered with the forum today to ask for advice with our Peak ASHP, also not reaching flow temperatures and the weather compensation setting not functioning, with not seeing any online i... | ||
|
|
Considering MLCP (Multi-Layer Composite Pipe) for ASHP
By iotum, 3 days ago |
|
| Hi - I'm new to the forum but I've been researching ASHPs for about 3 years on and off. My existing gas CH is getting old (20 year old boiler) and I don't want to be rushed into replacing it if it fa... | ||
|
|
RE: Solis inverters S6-EH1P: pros and cons and battery options
By Batpred, 3 days ago
Forum
Energy Storage
|
|
| Solis confirmed that the S6 works with a single battery (pack) via CANbus. So the BMS connected via CANbus needs "to take care" of any communication related to daisychaining of additional batteries. ... | ||
|
|
RE: RDSAP10 effect on existing heat pump EPC rating?
By Mike Patrick, 3 days ago |
|
| @tim441 I share your frustration with the EPC ratings. Attached is an extract from my new EPC which was done this week. You'll see that the Main Heating has the same description as yours but that it i... | ||
- 26 Forums
- 2,418 Topics
- 54.8 K Posts
- 1,063 Online
- 6,098 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
@jamespa sorry James, yes larger surface area, messing ...
By ASHP-BOBBA , 4 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 5 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 5 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 5 hours ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 8 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 8 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 9 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 12 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 14 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 15 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 17 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 17 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 18 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 18 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 1 day ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-

