Recent Posts

| Forums | Topics

Page 115 / 174 Prev Next

Posts with their shortened content
	RE: How good is the app support for your heat pump? By Judith, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	We use the Vaillant app and it does everything we need. Weather compensation and now the parameters can be adjusted on the app too. There are 3 modes, simple WC only the outside temperature controls i...
	RE: Pump and Esbe mixing valve for UFH By AndyCoo, 3 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	So my next question is about calculating pressure loss for pump selection. For the UFH loops it’s ok as there’s a table in the Design Guide, and the Esbe app gives me a loss number for the mixing valv...
	RE: 5 Star Service from Havenwise By benson, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@hcas majordennis is on the money for me in terms of what I'd expect to see when you are making claims of savings of 40, 50% etc. Would be much clearer and the last thing customers need in this indust...
	RE: How good is the app support for your heat pump? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@majordennisbloodnok Thanks. Not sure what your security concern is. I only use it for reporting and do not use any of the facilities to manage my pump. I do not want any reliance on the internet to c...
	RE: How good is the app support for your heat pump? By Majordennisbloodnok, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	You've mentioned that before, @richard24738, and it does look good. However, I do have a security concern about it that would make me rather cautious.
	RE: How good is the app support for your heat pump? By Morgan, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 thank you, I shall a look. Not heard of it until now.
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	Have you tried going to Fogstar's website and looking for downloads? It took me about 10secs to find the instructions there! 🤔
	RE: How good is the app support for your heat pump? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@morgan Not sure if you have done so but, if not, have a look at the Mel Pump app for Mitsubishi. It is chargeable but so much better than Mel-Cloud.
	RE: Midea ASHP – how to set weather compensation By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	It depends on what the actual heat loss is, what the changes are and how disruptive they are. If the actual heat loss turns out to be 10kW (ie at the bottom end of the range estimated based on your o...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Four questions: (1) what format is the data in? Hopefully csv or something that can be converted to csv? (2) how frequent are the logged data points in each of the data sets (IAT OAT and energy in)? (...
	RE: How good is the app support for your heat pump? By Sheriff Fatman, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I'm using Havenwise with an Ecodan system. I'm happy with it as a means to run the heating, but the reporting within the Havenwise app is currently very limited. It provides a rolling 7 day snapshot...
	RE: Midea ASHP – how to set weather compensation By pash44pump, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay and @jamespa - thanks for your replies. Unfortunately I don't have the last 4 years data. I bought the dataloggers at @cathoderay's recommendation and I therefore have the last 2 months of...