| Posts with their shortened content | ||
|
|
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH
By bonobo, 3 weeks ago |
|
| Hi, @heatgeek . Thank you for getting back to me, i appreciate your well thought suggestions. Apologies for the 8 month delay - life got in the way. original project was done by a professional heating... | ||
|
|
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
By Pirate Rich, 3 weeks ago |
|
| The Grant engineer has given you the correct information. If you let the water stop completely each time the compressor stops, consider what happens to the water in the pipes outside versus the pipes ... | ||
|
|
RE: How good is the app support for your heat pump?
By Morgan, 3 weeks ago |
|
| Like @majordennisbloodnok I have the Mitsi Ecodan and Melcloud. Melcloud sucks, and the major sums it up very well, particularly in his last paragraph. Enough said. I will be pushing the button to act... | ||
|
|
RE: 5 Star Service from Havenwise
By Majordennisbloodnok, 3 weeks ago |
|
| Totally agree, @hcas. I think there's a bit of a conflict, though. As you will have seen on this very forum, you now have quite a well-established reputation for up-front open and honest dealing, but ... | ||
|
|
RE: Pump and mixing valve for UFH
By Pirate Rich, 3 weeks ago |
|
| VRG131 is just a popular valve and can be adapted to any size using fittings. The pump can be chosen based on the pressure loss. What will be in control the ESBE valve actuator? We are an ESBE special... | ||
|
|
Pump and Esbe mixing valve for UFH
By AndyCoo, 3 weeks ago |
|
| Hi everyone Looking for some help with pump and esbe mixing valve selection for our UfH. We installed the loops and manifold in the Summer along with our geocell and limecrete floor. Now we are the st... | ||
|
|
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix
By Pirate Rich, 3 weeks ago |
|
| Exactly what I said in the video, and that is one of the worst AAVs in the market, so they can expect leaks in the future. | ||
|
|
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix
By Transparent, 3 weeks ago |
|
| Merely having air-release valves present isn't enough.They also need to be placed at the highest points in the pipework because that's where the air will collect. Look at this photo of a cylinder fitt... | ||
|
|
RE: How good is the app support for your heat pump?
By Majordennisbloodnok, 3 weeks ago |
|
| Show and tell, eh? OK, here goes. I've got a Mitsi Ecodan and, as a unit, it works brilliantly; I've no complaints. The app, however, is a totally different story. They call their app Melcloud and str... | ||
|
|
RE: Large heat pump options for church building
By Andy-e, 3 weeks ago |
|
| I would look at the Panasonic R290 M series large units combined with their Smart fancoil radiators, so you can have low flow temps and high outputs and no water blending for your underfloor heating. ... | ||
|
|
RE: 5 Star Service from Havenwise
By HCas, 3 weeks ago |
|
| Hi both! Appreciate the question. It's a good one. Firstly, you're right that we have started experimenting with Facebook ads in the last few weeks. It's something new for us, so we're testing differ... | ||
|
|
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
By Morgan, 3 weeks ago |
|
| @hcas Thank you. | ||
- 26 Forums
- 2,265 Topics
- 50.6 K Posts
- 815 Online
- 5,924 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
@mosibi yes I am interested in potentally evolving my s...
By benson , 24 minutes ago
-
RE: Electricity price predictions
The government has two consultations out at the moment ...
By Jeff , 2 hours ago
-
RE: UFH downstairs and radiators upstairs balancing question
@davidnolan22 Hi, ok first of all it very hard to truly...
By ASHP-BOBBA , 2 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
Installers coming tomorrow. One has messaged messaging ...
By Crimson , 2 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
11.2kW Ecodan Manufacturer: Misubishi Model: PUZ-WM...
By DRB01 , 2 hours ago
-
RE: Homely asking about Solar Panels.
@majordennisbloodnok I will report back with any develo...
By Toodles , 5 hours ago
-
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
Are you able to post a photo of that 180-litre cylinder...
By Transparent , 9 hours ago
-
Agreed. It doesn't take all that much maintenance to ke...
By Majordennisbloodnok , 11 hours ago
-
RE: Oil Boiler & Heat Pump Hybrid System
OK. Got it. As a fellow rural West Country resident, ...
By Transparent , 12 hours ago
-
RE: My DIY Heat Pump installation
@pollar-bear Top job, I installed my own too and even t...
By bontwoody , 13 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
There are two definitions of sufficient volume. The fi...
By JamesPa , 13 hours ago
-
RE: Who has a V2G EV installation
Not sure how you got that information, @batpred. As of ...
By Majordennisbloodnok , 14 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Ok so that seems to be the key point namely only mcs ca...
By JamesPa , 1 day ago
-
RE: One flow valve appears to be duff
You might want to consider the following common faults:...
By IaAck , 1 day ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
We are on the Intelligent Octopus Go tariff. We instal...
By GrahamF , 2 days ago
-
RE: New build installation query
@paullacey While the others wait for more info do you m...
By ASHP-BOBBA , 2 days ago
-
RE: British Gas Heat Pump Installation Complaint
@bgno, the other consideration for legionella cycles ar...
By Mars , 2 days ago


