Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 21, 2026
Good points I will have a look and see if I can find an example where the system is under heavier load. My house is like a cave and has a ridiculo...
😀 When Bolton and Watt came into the steam engine market they took a royalty based on the amount of coal saved compared to running a Newcome...
Here is an example of quite aggressive action of AutoAdapt - in this example we had been on holiday and set the heating down to 16deg C - On resettin...
Sorry meant to say increase in outside temperature has should have reduced flow temp
I am familiar with control theory - PID , feedforward , cascade loops , model based control etc - though more at a practical level than the mathematic...
Thanks both The reason I question if AutoAdapt is using any element of weather compensation is that I have seen examples where outside temperature h...
@jamespa Also a good way to get data- I have had a play with the dongle that plugs into the Ecodan and integrates to home assistant. All require...
Thanks Both for your thoughts. I guess I’m a slightly bored retired engineer looking for problems to solve 😵💫 Like you not...
@editor Hi Mars Just reading the ultimate heatpump guide - which looks to be a good general introduction for home owners to heatpumps. I apolog...
- 26 Forums
- 2,725 Topics
- 63.8 K Posts
- 1,163 Online
- 7,126 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
-
RE: Who's your electricity provider and what's your tariff?
Many thanks. Good info
By peterackstraw , 2 hours ago
-
@editor — it was a not very well implemented so far as ...
By cathodeRay , 2 hours ago
-
RE: Microgeneration Certification Scheme (MCS)
@jamespa A cynical view but, I fear that it is a fair ...
By Toodles , 2 hours ago
-
RE: Jokes and fun posts about heat pumps and renewables
... except that the legal notice (part of which was rep...
By JamesPa , 3 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Have either quote provided room by room heat loss calcu...
By Old_Scientist , 23 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist if you are going DIY then you may wan...
By Papahuhu , 2 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
After a short while that was followed by the 'power war...
By JamesPa , 2 days ago
-
RE: Samsung heat pump - data cable issue
That's well done. Cable is the correct type (LIYCY = 2x...
By bobflux , 3 days ago
-
RE: Electricity price predictions
I agree, we will find out at the next budget whether th...
By Old_Scientist , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
@editor I went through HG website, so should be ok for ...
By sttpd1917 , 3 days ago
-
RE: Air to air bus grant installer anywhere
The through wall two hole ones have their place (listed...
By EtchedPixels , 3 days ago
-
I hope it goes ok, Hon can be hard to set up IF the sof...
By Graham Hendra , 3 days ago
-
@clockworks Hi, So there is a big difference between st...
By ASHP-BOBBA , 3 days ago
-
@editor wellvery comprehensive answer. I will get all i...
By Keithb , 3 days ago


