Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 21, 2026
Got thinking about an easy way to measure heat output of an existing boiler without having to do surgery on the old system. found these connectors ...
@ian33a if you have done what is practical insulation wise then best to focus on draught proofing.
By the way we are very pleased with our heatpump in a 250 year old stone house. The thermal mass is massive so long low and slow works well - we just ...
@ian33a suspect thermal store and heatpump may not play nicely but not sure about that- do you have solar thermal as well?
Note this version is suitable for up to 17kw heatpump - which is practically all heatpumps you are likely to install. Note also it is not calibrated...
I would imagine you can integrate this to home assistant - however I would recommend OEM as it will just work out of the box - and if you then subscri...
@ian33a link to heat meter and Mbus dongle
We have one of these, displays flow in m3/hr to 0.1 accuracy.
Just checked and a DN25 heat meter plus fittings is £325 from OEM plus you need an Mbus dongle (£46) To install would require draining down all or p...
Not sure how heat geek ‘estimate’ heat loss online but if based on an EPC then in an old house of hybrid construction including cob then likely to be ...
Nice one I have your adapter- does it run on the same hardware? Have been using Auto adapt with controller in dining room but ability to try differe...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@peterackstraw 13.5 kWh’s of battery capacity is unlike...
By Toodles , 2 minutes ago
-
@editor — it was a not very well implemented so far as ...
By cathodeRay , 19 minutes ago
-
RE: Microgeneration Certification Scheme (MCS)
@jamespa A cynical view but, I fear that it is a fair ...
By Toodles , 20 minutes ago
-
Something sounds odd there; if you have solar power cha...
By Toodles , 24 minutes ago
-
RE: Jokes and fun posts about heat pumps and renewables
... except that the legal notice (part of which was rep...
By JamesPa , 59 minutes ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Have either quote provided room by room heat loss calcu...
By Old_Scientist , 21 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist if you are going DIY then you may wan...
By Papahuhu , 2 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
After a short while that was followed by the 'power war...
By JamesPa , 2 days ago
-
RE: Samsung heat pump - data cable issue
That's well done. Cable is the correct type (LIYCY = 2x...
By bobflux , 3 days ago
-
RE: Electricity price predictions
I agree, we will find out at the next budget whether th...
By Old_Scientist , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
@editor I went through HG website, so should be ok for ...
By sttpd1917 , 3 days ago
-
RE: Air to air bus grant installer anywhere
The through wall two hole ones have their place (listed...
By EtchedPixels , 3 days ago
-
I hope it goes ok, Hon can be hard to set up IF the sof...
By Graham Hendra , 3 days ago
-
@clockworks Hi, So there is a big difference between st...
By ASHP-BOBBA , 3 days ago
-
@editor wellvery comprehensive answer. I will get all i...
By Keithb , 3 days ago
SPONSORS
