Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

Transparent
Transparent
@transparent
Moderator
Illustrious Member
Joined: Jan 20, 2022
Last seen: Jul 30, 2026
Topics: 16 / Replies: 3326
Reply
RE: New Fogstar 15.5kWh upright solution

Please clarify @bash Did you top-balance the cells before installing them in the Seplos enclosure,or were you relying on the inbuilt BMS to handle t...

9 months ago
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

If they do refuse,then they probably didn't intend it to be refuse in the first place 🤗

9 months ago
Reply
RE: Maximising Home Automation: Integrating Octopus Energy & More

Haven't reached the stage where one of you is going to post a generic diagram of the 7-level OSI model? There will be others considering HA in futur...

9 months ago
Forum
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

Yes, a gas boiler would be a legitimate reason for such air vents. I don't know what their external face looks like, but I would recommend a tempora...

9 months ago
Reply
Forum
Reply
RE: Maximising Home Automation: Integrating Octopus Energy & More

Apologies, I'd missed that earlier post. James is correct. Consumers cannot directly contact the Communications Hub box of a Smart Meter. The Comm...

9 months ago
Forum
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

Is your reference to 6.7kW based on the initial post in this topic? The OP stated in that post "The heat loss calculation then provided by the insta...

9 months ago
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

That's an interesting use of the phrase 'site-specific conditions'. I've met it being used elsewhere when a contractor wishes to simultaneously clai...

9 months ago
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

@mairia - if you want to try following the discussion about the buffer tank, there are two previous topics with diagrams to help. See this one about...

9 months ago
Reply
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?

The buffer tank is beneath the DHW tank. The DHW section has a brass drain-valve facing us. The blue-handled lever valve is on a pipe which seems ...

9 months ago
Reply
RE: RDSAP10 effect on existing heat pump EPC rating?

The house is T-shaped @toodles. The SW side has another part of the roof at right-angles to what's visible in the photo. I would've put PV on th...

9 months ago
Page 54 / 279
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Members Online

 No online members at the moment

Click to access the login or register cheese
Protected By
Shield Security PRO