Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 16, 2026
Allow me to clarify this for the benefit of @mrkfm Firstly the application process with your Distribution Network Operator (DNO) is much improved o...
I'm going to attempt answering this whilst simultaneously responding to the point about busbar current limits by @bobflux Because the OP mentioned ...
Nope. Generators, inverters storage-batteries are connected to the Consumer Unit just as any other "load circuit" would be. That means they have a...
Let me try an answer at a lower technical level... The "fused spur" you've heard about is a method of having an electrician install a small porta...
Good questions @mrkfm Domestic battery storage is definitely worthwhile investigating now. No, it's not possible to calculate your Return on Investm...
The answer is going to depend on what characteristic of "direct sunlight" their particular OAT sensor is picking up. Is it sensitive to the photons ...
I would expect the air being pulled past the temp sensor to have a cooling effect. Don't any ASHPs have a connector on an internal control board to ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 10 hours ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 12 hours ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 14 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 15 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 15 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 15 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 19 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 20 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 22 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 23 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 2 days ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 2 days ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 2 days ago
SPONSORS
