Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 15, 2026
I suggest you start by looking at the Sunsync Hybrid Inverters and then compare any others against that. Sunsync have pioneered a concept of "Home L...
The weakest link in the UK Electricity Network is the introduction of Smart EV Chargers which are sent commands using the internet, rather than vi...
A photo of your buffer tank would be a good start.Let's have a look at the size and how it's been plumbed.
Layman's explanation of how a PV Solar Panel works: There are these two silicon atoms sitting on a roof in the sunshine. A photon comes hurtling a...
Returning back to the original point made by @retrobod - You will now understand that it is the storage of the electricity produced by your solar pa...
The timing is 'accurate' for you only because the offset being applied by your Electricity Smart Metering Equipment (ESME) falls within the first 15mi...
pH isn't high enough.I'm unsure whether system inhibitor would've been adequate to raise it. I would expect it should be lying between 7.3 - 7.8
Thanks Phil. So your installer is knowledgeable enough to know that your Go Tariff doesn't start at 00:30GMT (UTC) and has therefore hedged your bet...
Hi @phowardstutterheim - I did spot your post arriving on your other topic this morning, but I was busy trying to resolve an unrelated issue in China....
Yes, I understand that.I also have this arrangement using Octopus Go. I'm asking how you have actually implemented the battery charger to switch in ...
Please tell us more @filipe Roughly whereabouts are you in the country?I'm interested to assess the extent of renewable energy assets in your region...
There's already a bill attached to my forum avatar 😉
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
@batpred I take your point and, perhaps, your experienc...
By ian33a , 1 hour ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 21 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 1 day ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 1 day ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago
SPONSORS
