Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 30, 2026
@batpred I think you probably got the wrong end of the stick with this supplier. Maybe stick to givenergy?
My fogstar seplos battery has been great and the service fantastic. I don't run an active balancer but did match and top-balance the cells. I wrote a ...
I was asked if I was happy before I was even issued the certificate in a handover pack.
@agentgeorge I don't need too because I sniff the modbus
Think of it like a dT modulated unit. Since they can offer a tarrifs into a specific unit with say a oversize compressor, it does make sense to aim at...
@editor If the cert does not exist then this may step outside of consumer rights!
You have rights under the Consumer Rights Act 2015 (potentially services not as described; reasonable care and skill) ask the company for a remedy; so...
What a saga. The one big positive in all of this is that your installer sounds excellent. They’ve clearly gone into bat for you with Clivet. You wer...
@jamespa I rolled my own storage. £40 per kWh. I am not privvy to the exact control algorithm, but it definitely seems to have some room ...
Overall ive found it fantastic. It's almost magic. Running it off 8p stored electric 😂. My house was originally supplied with a ridiculous o...
@editor most senior engineers ocotpus send will have good experience with the limited numbers of red installs out there. Reds were interest...
@jamespa I haven't bothered at all. The system isn't even balanced. The cost to me was less than the gas valve that just got replaced on the oversiz...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 3 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 14 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
