Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 6, 2023
Our experience with auto adaption has been and is good - 14kW Zubadan installed Nov 21. image shows last couple of days flow temp, room temp, outs...
@transparent RSF CC13 is next
@transparent the only number I can see is RSFCCA1
@transparent We are fed from a transformer up a nearby pole - I believe from 11 kV distribution (asked engineers doing some work a while back) - no id...
@transparent National Grid Electricity Distribution (West Midlands) plc
@transparent Thanks for taking the time. Bit of extra info - when I finally received the G99 connection approval the confirmation letter included th...
@transparent don't wish to hijack the thread but please could you elaborate re " This diagram is from Powerwall installation manual It shows a li...
@robl thanks for that. Now I have to research reading Modbus in home assistant - HA does all my logging and reporting in the one place.
£5k sounds a lot for an 11kW heat pump but no way to usefully comment without lots more info - maybe start another thread? Some questions: predicted...
@morgan Yes, could be. MMSP refers specifically to the Model Metering and Service Package which was part of the now ended Renewable Heat Incentive (RH...
Unless you have external metering the Mitsubishi 'indicative' consumption figures are rubbish when the heat pump is in idle. Been discussed here: ...
I've been monitoring how Time-based Control performs for us over the last 9 days. Results in this image. All the details here (bit long for foru...
SPONSORS
Degrees of Separation
Latest Posts
-
If you freeze water it expands. That's been a big probl...
By EtchedPixels , 1 hour ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
Ultimately they are trying to make it possible for low ...
By EtchedPixels , 1 hour ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 2 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 3 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 4 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 5 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 6 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 6 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 19 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 20 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 20 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
@editor Most certainly. The heat pump was an ideal s...
By Abernyte , 1 day ago
-
RE: Does anyone have experience of a smart water meter?
Yep I caught our slow leak from a £100 bill rise 8)
By EtchedPixels , 1 day ago
SPONSORS
