Last seen: May 4, 2025
@transparent the TB-C F1 & F2 screw terminals with the screened twisted-pair are the RS-485 link to the Outdoor Unit. I agree with your comments...
@david999 The blue and brown wires at the top right are connected to TB-C F3 & F4 on the controller PCB. I'm sure this is the RS-485 communic...
@elton that's interesting about the tonality of the noise. Certainly when the noise from our pump is most obtrusive it is a very harsh, complex sound ...
@lokisam it is good that you have been able to visit other sites to compare the noise with your pump. I haven't found any other Samsung installations ...
Thanks @allyfish - yes dry lining on a timber frame. I'll get the clips changed to insulated/cushioned ones to see if that reduces some of the noise...
@lokisam, I also have what feels like a very noisy 8kW Samsung ASHP. The noise gets all through the house (new build, single story, 2 bedroom, underfl...
Hi @morh. Excellent find, thank you for sharing. I was about to start looking at how to route a signal cable to my external unit before buying a Mod...
@david999 the OAT sensor on the back of my 8kW unit looks the same as yours. I think the actual sensor is towards the open end of the pipe and the cab...
Here is a picture of my Samsung Gen 6 8kW yesterday evening. The outside air temperature was 3.5C, the relative humidity was around 90%, and the ASHP ...
Thanks @transparent, I'll have a look at that.
Hi, I'm Stuart. I live by Loch Ewe in the Northwest Highlands of Scotland. We have a Samsung Gen 6 8kW ASHP with a Joule Smartplumb Unvented Cylinde...
Latest Posts
-
RE: Commencing on an ASHP Installation Process
I prepared this analysis for a post on another forum (a...
By Sheriff Fatman , 6 hours ago
-
RE: LiFePO4 lithium battery fires and explosions
Yes, more than an adjustment... This is the only comb...
By Batpred , 6 hours ago
-
RE: Poll for Time of Use, tariffs, technology
@old_scientist Interesting point, but I suspect that's ...
By Sheriff Fatman , 7 hours ago
-
RE: Different dT on each radiator?
I cant sorry. Its based on some calculations I did fro...
By JamesPa , 9 hours ago
-
RE: Setback savings - fact or fiction?
Maybe this: or maybe that the effect you are seein...
By JamesPa , 10 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@simonf thats interesting as I’ve noticed my flow and r...
By AdamK , 18 hours ago
-
RE: MELcloud scheduling misbehaviour
No, it gets to set temperature easily even during perio...
By Abernyte , 19 hours ago
-
RE: Free Ecoheat Heat Pump Install
Sorry hit 'add reply' too early, this forum layout will...
By Deltona , 20 hours ago
-
And arguably even more important, sodium will be hopefu...
By Batpred , 23 hours ago
-
RE: A Smarter Smart Controller from Homely?
I've been thinking of emailing Homely to ask for a few ...
By JohnnyB , 1 day ago
-
Max output of Heat pump (Daikin 4Kw EDLA04)
Hello, I am a bit puzzled that according to pcdb tes...
By GeorgeA , 1 day ago
-
In that case, @technogeek, I’d sign up for the free sol...
By Majordennisbloodnok , 2 days ago
-
RE: Has Anyone Else Noticed a Decline in Tradesmanship?
@cathoderay Hence my rider about ‘all else being equal’...
By Toodles , 2 days ago
-
RE: Heat Pump Performance Analysis Web App using Modbus Data
@redzer_irl — all my heat pump data is in csv files, me...
By cathodeRay , 2 days ago
-
That’s not a problem. If you can hit the main landing p...
By Majordennisbloodnok , 2 days ago
-
RE: Configuration issues with 10kW Midea R32 heat pump
@benson I believe there are quite a few of these instal...
By Toodles , 2 days ago
-
RE: 10kw heat pump run in 24*7 data?
I would say you most likely do need 10kW. My gas consu...
By JamesPa , 2 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink I managed to find the fault. I did it a lo...
By meehow , 2 days ago
