Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 23, 2026
Again, really don't know how accurate this is!
@grahamf thanks! I'm unsure if there's inhibitor, I can double check but they seemed to know what they were doing. There's the mag filter and 2 new ...
Thanks @jamespa ! I've been reading the manual and tinkering with some settings. What I'm going to state might not be 100% correct so anyone who is ...
Tripping apparently caused by Type B fuse, changed to type C I believe My outstanding questions for the forum before I sign-off are: Is polyethyl...
So it turns out you can only see the power consumption, COP, etc. on the Aerona smart controller itself, not the econet24 web interface or mobile app ...
Okay, everything's done apart from a few things that they're coming back early next week to sort (damaged radiator grill, tidying up, etc) There's ...
@editor I'm fairly certain it's this company but I'll have to check with the installer
Has anyone heard of or had a survey/design done by Apex? A company I'm currently in talks with has used them for the heat loss survey + design and t...
It's a detached house with a fairly large split-level entrance/hallway/landing area that's all under a vaulted ceiling with velux windows. the kitchen...
Thanks everyone! My current system boiler and pipework has 22mm flow pipe that splits into a T after the valve, with one side going to downstairs an...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 51 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 4 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 9 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
