Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 7, 2026
Having looked into the source of it a while ago, and done experiments with operation time, that "received wisdom" seems to be a distortion of the advi...
It can be done from both, but it's far easier from the controller: put the system into flow mode (menu: Heating: left button until pic of a water drop...
That, plus the words "controller installed in loft" on the schematic worry me. Are the Mitsubishi controls in the loft, or is the FTC panel somewhere ...
No need to download anything. A web version is available at/p> Going back to some things written earlier: 600kWh so far this month is not outrageous...
Surely they can remove the meter fuse in most homes with external meter cupboards? And how do you know they aren't already wiring in remote controls ...
No, but it's the best that can be done now: equivalent "green" electricity to my usage is bought into the grid. I don't know and I don't really ...
The trouble with stickies is that each one means one fewer current discussion on the front page and the first page of each section, which is already l...
@editor nonetheless, even if HVO is going to be used, wouldn't it be better to burn it in power stations and replace domestic burners with subsidised ...
@editor of course they won't say that but few businesses are in business to put themselves out of business. HVO is still a way to keep oil burners in ...
They can already shut off supply and if we get to that dystopia, smart metering and shutoff will simply be installed on the energy company's side of t...
They can already shut off supply and if we get to that dystopia, smart metering and shutoff will simply be installed on the energy company's side of t...
Yes. I didn't know it had been finalised and prices displayed yet.
- 27 Forums
- 2,753 Topics
- 64.7 K Posts
- 631 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 2 hours ago
-
RE: Adventures in heat loss calculations
yes and no. apparently HG’s AI was automatically assumi...
By Batpred , 2 hours ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 3 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@rob-of-york Thank you for that, whilst familiar with t...
By kilgorexv , 3 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 4 hours ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 7 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 4 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 4 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 4 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 4 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 4 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 5 days ago



