Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 10, 2025
@dinhp I have a 12kW Gen 6 Samsung and your weather compensation settings look fine. Mine are -5/50 and 10/30, so at 7C OAT our flow temperatures shou...
I am glad to hear that your consumption problem has resolved. On starting, it seems that the compressor ramps up to close to 100% and then modulates d...
There are 2 main display options on your wired remote controller. In both displays the current flow temperature and room temperature are shown on the ...
Have you seen this video? Cleaning the filter shouldn’t be a big deal. I shut both lever valves before I clean mine.
Could you post a photo of your wired remote controller display please? It is not clear from your description just how you are trying to control the fl...
I find it a very useful mode. However, it seems to behave a little bit strangely. When the outside air temperature is above 10 C, then it seems to mak...
@majordennisbloodnok They exclude standing charges and are for imported electricity from the grid.
@morh Apologies for the last post. It added the post before I had finished and I have since managed to reduce the program size by removing the lines r...
@morh I have followed the instructions on setting up the M5stack atom lite on Linking .pioenvs/esphome-web-a07180/firmware.elf RAM: [== ] 18.6% (u...
These are our figures. We have solar but no battery.
@raiph Thanks for that. Actually that makes more sense now. I presume 2/5 is when the compressor is at 100% and 3 or 4 will be at lower %.
@minted_lamb Many thanks for that. I am waiting for my M5stack to arrive and in the meantime I have managed to install HA inside VirtualBox, thanks to...
SPONSORS
Degrees of Separation
Latest Posts
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 4 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 8 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 21 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 21 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago
SPONSORS
