Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 12, 2026
In general lower FT = higher efficiency. These are only 1C apart however and with different outdoor temps, but perhaps more importantly both have ...
Consumption is not that much different to mine when it was very cold. You wont be getting a COP of 4 when its -3~-5 outside, more like 3 or possibly ...
The bodies of TRVs usually have an arrow on them. If it can operate bidirectionally it will be a bidirectional arrow!
Thanks for the suggestion. This appears to have a solid shiny surface and be designed to reduce transmission. I think what I need to do in my s...
My 7kW Arotherm does the same. Its especially noticeable during recovery from defrost, when the compressor is going at 100%, and at this point its ha...
Sadly I think you are right, until someone develops a cost effective no-frost coating which can be applied and prevents (or reduces) condensation buil...
... in theory! If they are all (close to ) perfectly sized then adjusting setting them up for consistent deltaT across the radiator is another way t...
I too have been thinking about this, not least because the only disappointment with my heat pump is that its noisy when recovering from defrost. I t...
I mean the room. I'm assuming that there is spread in radiator sizing in reality!
Perhaps I didn't make myself clear. Let's make up a scenario and see if we can do better. Suppose you want all rooms at 20C. Your rads are success...
Apologies if you already know this but dont try to get the temperatures right by adjusting the rads, aim to get them approximately the same. That sho...
- 27 Forums
- 2,815 Topics
- 66.7 K Posts
- 2,820 Online
- 7,230 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Plug and play solar. Thoughts?
Impressions so far from the one I've installed are that...
By EtchedPixels , 6 minutes ago
-
-
@batpred The Daikin temperature probe protrudes from th...
By Toodles , 3 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor And as an occasional contributor, may I say wel...
By Toodles , 6 hours ago
-
RE: Should Households Who Can Afford It Pay More for Energy to Help Those Who Can't?
They don't have to try. Our entire system is d...
By EtchedPixels , 6 hours ago
-
RE: Why don't people choose heat pumps?
Fair enough. I guess I was thinking of pipes that run ...
By JamesPa , 6 hours ago
-
RE: How Can I Prove Coal Was My Main Heating Source Without Receipts?
Got excepted for the grant now so thanks for the replie...
By Chilli304 , 10 hours ago
-
Daikin Altherma 3 R F+W, room thermostat control, weath...
By JanHarley , 11 hours ago
-
RE: Buffer tank on a 2 x 14kw Ecodan system
Pretty much as I had guessed in my crude scaling from m...
By JamesPa , 14 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Well you have a vibration generator running at some fre...
By bobflux , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@downfield Thats a decent rate, I’m shocked they hadn...
By Papahuhu , 2 days ago
-
RE: Adventures in heat loss calculations
@toodles thanks! So as suspected, around a doubling of ...
By SusannaSaunders , 2 days ago
-
Six books in three years and I think I’ve now covered j...
By Mars , 2 days ago
-
RE: Grant Aerona3 13kw - Buffer Tank - Heating Journey
@heymikey Well done in achieving as nearer a match acro...
By Toodles , 3 days ago



