Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 26, 2024
Problem resolved - there was a reducing valve under the bathtub restricting flow.
@johnmo Hi, please can you confirm what balance flow is? I turned the shower to cold and opened the cold taps and the shower flow didn't change.
@derek-m I've checked the shower flow by turning on two cold taps and the shower flow/pressure didn't change.
@johnmo thanks a lot, I'll give it a go tonight and report back.
@johnmo please can you explain why I'd struggle to get a hot water shower with those water pressures? if I turn in the stop clock to reduce flow, co...
@derek-m not sure on the cylinder pressure but the flow drops massively when I open multiple taps, almost to a stop.
@johnmo thank you for responding. I have responded in red with more info. two things affect flow through the DHW cylinder. Assume it is an unve...
@derek-m yes I did, I have replaced the shower cartridge unit and it made no difference.
thank you for responding. I have responded in red with more info. two things affect flow through the DHW cylinder. Assume it is an unvented cyli...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@peterackstraw A few observations rather than a recomme...
By Toodles , 2 minutes ago
-
My newly installed Tesla Powerwall 3 and Gateway. The b...
By trebor12345 , 3 minutes ago
-
RE: Microgeneration Certification Scheme (MCS)
I personally would characterise it as a process/standar...
By JamesPa , 16 minutes ago
-
RE: Jokes and fun posts about heat pumps and renewables
... except that the legal notice (part of which was rep...
By JamesPa , 27 minutes ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Have either quote provided room by room heat loss calcu...
By Old_Scientist , 21 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist if you are going DIY then you may wan...
By Papahuhu , 2 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
After a short while that was followed by the 'power war...
By JamesPa , 2 days ago
-
RE: Samsung heat pump - data cable issue
That's well done. Cable is the correct type (LIYCY = 2x...
By bobflux , 3 days ago
-
RE: Electricity price predictions
I agree, we will find out at the next budget whether th...
By Old_Scientist , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
@editor I went through HG website, so should be ok for ...
By sttpd1917 , 3 days ago
-
Who did the Freedom Heat Pump cloud server and what did...
By Mars , 3 days ago
-
RE: Air to air bus grant installer anywhere
The through wall two hole ones have their place (listed...
By EtchedPixels , 3 days ago
-
I hope it goes ok, Hon can be hard to set up IF the sof...
By Graham Hendra , 3 days ago
-
@clockworks Hi, So there is a big difference between st...
By ASHP-BOBBA , 3 days ago
-
@editor wellvery comprehensive answer. I will get all i...
By Keithb , 3 days ago
SPONSORS
