Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 23, 2025
So close..... @robl My battery discharged all day lovely got to 20:30 before it ran out - 20%SOC once it hit 20% - the Sunsynk immediat...
@adrianmc Ive it setup 90% ~ 10% - to match the 80% DOD rate that is listed in the Fogstar manual.
@robl And as everyone said and expected, the CT cabling was the wrong way round. The manual is awful in that section, basically guess the colou...
So life got in the way, as it normally does - I have eventually got onto it and installed it - following regs as best i can. MCB Surge protect...
@misterb @editor So it has actually arrived. Will post a decent update after I attempt an install this weekend.
@misterb apologies, I made a typo! And I can't edit it On the battery cables, no - Fogstar does not apparently sell nor state the cable size needed....
@editor Yes, DIY install in my Garage.
@misterb good info, I see your viewpoint not I purchased the sunsynk 5kW - matches my use case and it's as much as I want to spend. Now for access...
@misterb why a 8kW one, what is your thinking - if you could expand a little
@misterb Good to hear, Will likely purchase the Sunsynk this weekend - after a little research. What is you opinion on the app and the feedba...
I have went for and purchased this around Xmas. Delivery has been confirmed for next week, looking forward to it arriving. Regarding inverter ...
Have you seen/installed the Grant screen yet? Ive not seen it mentioned yet on my channels.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 23 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 6 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 11 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
