Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 6, 2025
I'm not sure of a paint product for for sealing leaks outside I've found clear CT1 is excellent for stopping leaks and being weatherproof as other sea...
Is it possible to have the boiler connected to a thermal store that could be isolated with valves on the central heating system? This would allow y...
For me its best to stay on 21p till April as we are heavy users at roughly 3,800 kWh per month in the winter months.
Cheers. Glad I stayed on the Eon Next variable tariff as the cheapest fixed tariff being offered was 35p kWh... Sadly I think lots of people hav...
Does anyone have a link to the new unit rates?
Utility warehouse still seem to be the cheapest at 20p kWh but it doesn't seem simple to get setup with them as they seem to want to sell you phone/br...
Here is our data from 2021. Surprisingly we managed to save a little compared to 2020 given that the last two months our electricity tariff is nearly ...
I think this is due to the scale of the graph. Look at hourly temps instead so it shows the flow and return over 60 minutes during the hours where the...
For larger properties this is my thought as well. When you have large areas/zones that don't need heat but its being sent there it can really take awa...
I have the 14kw model in a 418M2 property and we are averaging 52kWh per day for heating and hot water in December so far (heating only is 39kWh).
Here are some photos from our 14kw Ecodan installation in December 2019. We utilized the old oil boiler/tank shed to house the new 500l cylinder and m...
Last year we paid £193+vat to have the ASHP and unvented cylinder serviced. They also inspected every radiator in the house and 3 underfloor heating m...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 2,618 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 7 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 12 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago



