Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
You are basically correct in what you state. A buffer tank may cause lower efficiency due to mixing unless the water flowrate both in and out is kep...
@jamespa Having now answered the first part of the original question, that setbacks do appear to save energy, how do you propose that the second par...
Please feel free to ignore all my post.
@jamespa If my understanding is correct, I think that you will find that the modeling tool performs the task that is being requested, since it calcu...
Hi James, There is a relationship between OAT and Energy In, but it is not as clear as the relationship between OAT and Energy Oat. The relationsh...
I suppose it depends upon the size of your solar PV array and the quantity of hot water used. The diverter, as the name suggests, only diverts the e...
@jamespa I had arrived at similar conclusions so time ago. Please find attached a table that I also produced some time ago to investigate the effe...
@toodles I think that you may find that even when fully open, the valve internals will have a smaller diameter than the attached pipework. Also radi...
In the Stiebel manual there is mention of an Oil Sump Heater, which may be using some of the 200W, though it would be be best to ask Stiebel and/or yo...
I believe that some heat pump try to maintain a fairly constant DT, by varying the water flow rate, while other keep a fairly constant water flow rate...
You are obviously already aware that for best overall efficiency, water should flow through the maximum heat emitter capacity. It is very unlikely t...
I would suggest that you leave the system as it is for the time being, but monitor the temperature in each room. If any particular room starts getting...
- 27 Forums
- 2,737 Topics
- 64.3 K Posts
- 590 Online
- 7,143 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Electricity price predictions
So a final update on Charge Pack, now I have nearly rea...
By bontwoody , 3 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
My ideal install would have my battery installed before...
By BlizzardGreen , 3 hours ago
-
Do I need to change the control unit when replacing my Ecodan Air Source Heat Pump
I have a 16 year old Mitsubishi Ecodan (5kw) that has a...
By CalumM , 4 hours ago
-
RE: Grant Aerona Air to Water R290 6.5 kW - Quiet Mark and Silent Running
My LG does the same: when turning it on, it's below the...
By bobflux , 6 hours ago
-
RE: PV and battery long payback - sense check query
@old_scientist I have now drafted 2 replies - both have...
By DavidB , 21 hours ago
-
RE: Can I start an argument about buffer tanks please? 🙂
Assume flow from the heat source is higher than flow to...
By bobflux , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: adrian Manufacturer: Appliandirect.co....
By Adrian , 1 day ago
-
RE: Acond heat pump failed after four years - diagnostic quote £940 plus VAT
@downfield Thank you Downfield. This sounds potenti...
By Mia , 2 days ago
-
RE: Digest of UK Energy Statistics
@jeff Yes my brother in Oz told me of that charge year...
By Jancold , 2 days ago
-
RE: Love veg, hate watering cans
My dear daughter came for a bath and was given clear (I...
By Jancold , 2 days ago
-
RE: Questions about A2A for heating as well as cooling
@ashp-bobba ah that's good to know, I'll get in contact...
By donciccio , 2 days ago
-
RE: Aircon - in listed buildings
@etchedpixels thanks for giving such a full and helpful...
By GrahamF , 3 days ago



