Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@cathoderay Yes, I have seen your added code, but there are two instructions that it does not contain, 'append' and 'extend'. If my understanding is...
At least you know that the filter is clean. I don't suppose that it has made any difference to the flow rate. The next task will be to confirm that ...
You may well be correct. I have had a further thought. Rather than just adding new items to the list, maybe they should be appended to the original ...
@sarah I suppose the answer is 'how long is a piece of string'. The frequency of how often to clean your filter will depend upon how much debris acc...
I assume that you have changed the pump speed on the controller, I suspect this will have no effect, since I do believe that your pump speed is not be...
HarriUp's keen eyes appear to have spotted a filter unit in your system, I would suggest that you clean it and see if that improves the flow rate. I'm...
I would suggest that you contact Mitsubishi Technical Help, since they should hopefully be able to help.
It may become clearer later, though it is annoying that the code is poorly documented. Maybe you could ask the question on GITHUB, since the person ...
The air vent should normally be installed at the highest point in the system, since air will accumulate at the upper sections. What temperatures are...
I had noticed that there are one or two manufacturers who offer this capability, but I must admit I have not looked at it in detail, and the reasoning...
If you would like to send a text copy of the C3 device and message files, I will see if I can modify them to achieve the desired result. I will probab...
Do you have a water filter, and if so, has it been cleaned?
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 7 hours ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 11 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 20 hours ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 1 day ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 1 day ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 4 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 5 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 5 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 5 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 6 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 6 days ago
SPONSORS
