Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@newhouse87 I will try to reply sometime tomorrow. What is the size and type of your home? What is the model of your heat pump? Do you have radiat...
Did your installer come riding a horse and wearing a 'ten gallon hat'? 😋
@cathoderay It would appear from your 0x04 test, that the first byte within the message body indicates the body type, then either the body length is...
What happens if you add byte_17 to byte_25?
@cathoderay When you first discovered the type 04, notify1 message, was the data obtained as provided by recent messages, or did you manage to obtai...
It is not possible to select a particular output, they are included within the test data to indicate the likely power consumption and efficiency when ...
@cathoderay I have also been trying to figure out where the message type, and hence structure is being selected within the code. Looking at the he...
@cathoderay I have been doing some further investigation into the structure of the message body with the following results. The actual length of the...
When you checked the message length, did you add additional items to the requested list? If not it could be just supplying the requested items and hav...
Having possibly increased the size of the body type from *18 to *25, it may be useful to try adding bytes 23, 24 and 25, to see if the body type has a...
Yes that's fine.
@cathoderay A further test would be to change all occurrences of 'tank_actual_temperature' to 'byte_21' to see if it still produces data for 'tank_a...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
I know most of the folks I use pretty well so I'm fairl...
By EtchedPixels , 3 hours ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders I'll set this up and start monito...
By Rob of York , 4 hours ago
-
RE: Electrical works for air to air heat pump
An electrician who signs off work is responsible for it...
By EtchedPixels , 9 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 9 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews I have read you latest response re buffer ...
By JamesPa , 1 day ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 2 days ago
-
-
@editor Ouch, sorry to re start the tick. I had assume...
By DavidB , 3 days ago
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 3 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 4 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 4 days ago
-
RE: Double or Triple Glazed Windows?
Posted by: @singlespeed With 9 years repairing windo...
By Rob of York , 5 days ago
-
@transparent we’re still running a secure version of PH...
By Mars , 5 days ago
-
RE: How quickly would you want/expect heat recovery to take from setback?
Much longer than that here. The heating isn't even on. ...
By bobflux , 5 days ago
SPONSORS
